30dBm PCS 1900MHz Cell Booster/Cellphone Signal Repeater / Mobile Signal Booster (GW-30RP)
|FOB Price:||Get Latest Price|
|Min. Order:||1 Piece|
|Production Capacity:||2, 000PCS/Month|
|Transport Package:||Neutral Packing|
|Payment Terms:||L/C, T/T, Paypal, Money Gram, Western Union|
- Model NO.: GW-30RP
- Transmission Medium: Wireless
- Trademark: Greetwin
- Origin: Shenzhen
- Type: Signal Repeater
- Max Gain: 80db: Max Output: 30dBm
- Specification: CE, RoHS
- HS Code: 8543709200
Indoor Pico Repeater (Signal Booster) series is an ideal solution for small/medium businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has easy access to a BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area.
Smart Function, Intelligent mode setting.
Compare to the worldwide repeater brand, has a smart function called which can be activated via the front panel. This smart function can prevent UL interference and self-oscillation caused by insufficient isolation between donor and service antennas, and also setup parameters and keep optimal condition automatically; The only thing for users is just activating this function by front panel.
Notify that the users can't adjust by manual setting when smart function is initiated.
For example, (To set attenuation for the uplink)
Step 1: Press SELECT till the indicator stops at uplink.
Step 2: Press STORE and LED monitor starts blinking.
Step 3: Press"+", "-"to an intended gain value.
Step 4: Press STORE to set the value and the LED stop blinking and
Showing the gain value at the moment, the process is done.
Uplink silent function.
Repeater uplink is not used when the device will automatically close up PA. Open the -90dBm uplink signal sensitivity. The upstream silent function can make the repeater station to base station interference is reduced to the minimum, to ensure that equipment is not interference base station. This function customer can also use the equipment operation buttons on the panel to open or close the function, facilitate customer choice.
Antenna isolation testing.
The product also has a repeater mounted antenna isolation detection function. Equipment installation completed boot automatically after the onset detection transceiver antenna isolation, if transceiver antenna isolation can not meet the installation requirements, the device will automatically reduce the gain to guarantee the equipment in normal working, not self-excitation vibration, guarantee not to interference protection of base station, repeater itself. At the same time alarm exhibit of lanterns bright red light alarm. Device LED gain display panel will display device is reduced after the equipment current gain state, which has the advantages of convenient construction, but also to protect the base station equipment, and does not generate interference.
1) AC90-264V, DC9V/5A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
1)Donor antenna: Log Periodic Antenna (9dBi@806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi@806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, etc.
|CDMA 800/GSM 850||824-849MHz||869-894MHz|
|Max. Output Power||27dBm||30dBm|
|Band width||Wide Band|
|Manual Gain Control||31dB / 1dB Step|
|Automatic Gain Control||>20dB|
|Ripple in-band||≤ 6dB|
|Return loss||≤ -10dB|
|Noise Figure||≤ 6dB|
|WCDMA||Spurious Emission Mask||Meet 3GPP TS 25.143 ( V 6.2.0 )|
|Modulation Accuracy||≤ 12.5%|
|Peak Code Domain Error||≤ -35dB@Spreading Factor 256|
|Time Delay||≤ 1.5 μs|
|Frequency stability||≤ 0.01ppm|
|MTBF||> 50000 hours|
|Power LED||Power indicator|
|Alarm LED||Red||Autoexcitation or High Power|
|Switch||Power Switch\Manual Gain Control Switch|
|Cooling||Heatsink Convection cooling|