Customization: | Available |
---|---|
Type: | Signal Repeater |
Transmission Medium: | Wireless |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Frequency Range | Uplink | Downlink | |||
LTE800+EGSM900+WCDMA2100 | 832-862 / 880-915 / 1920-1980MHz |
791-821/ 925-960 / 2110-2170MHz |
|||
Gain | 73dB±2dB | 78dB±2dB | |||
Output Power | 20dBm±2dBm | 27dBm±2dBm | |||
Band width | Wide Band | ||||
Manual Gain Control | 31dB / 1dB Step | ||||
ALC | ≥ 20dB | ||||
Ripple in Band | 8dB | ||||
Noise Figure | ≤ 6dB | ||||
VSWR | ≤ 2.0 | ||||
Intermodulation Products | ≤ -40dBc | ||||
Spurious Emission | 9KHz~1GHz | ≤ -36dBm/30KHz | |||
1~12.75GHz | ≤ -30dBm/30KHz | ||||
Time Delay | ≤ 1.5 μs | ||||
Frequency stability | ≤ 0.01ppm | ||||
MTBF | > 50000 hours | ||||
Impedance | 50Ω | ||||
Power Supply | AC 90-264V, DC 10V/6A | ||||
Power LED | Power indicator | ||||
Alarm LED | Red | Self oscillation or Strong input signal | |||
Green | Normal | ||||
Mechanical Specification | |||||
RF Connector | N-Female | ||||
Switch | Power Switch | ||||
Cooling | Heatsink Convection cooling | ||||
Humidity | < 90% | ||||
Operating Temperature | -10°C ~ +55°C | ||||
Environment Conditions | IP40(Indoor) | ||||
Installation Type | Wall Installation | ||||
Size | 354mm*268mm*58mm | ||||
Weight | < 6.5Kg |
POWER LED | Green | Normal |
Off | DC power problem | |
ALARM LED | Green | Sys-1,Sys-2 or Sys-3, working in linearity |
Red | There are strong input signal or severe self oscillation. Attention: input signal level is too high or the space of donor antenna and service antenna is not enough. please adjust the gain, If the red light still turning on that means over accepting of donor antenna or strong interference, then please adjust the place of donor antenna. |
|
Off | Repeater breaks down, Please re-plug in and check if Alarm LED turns red, if it is, please take measures to keep Alarm LED green; if it maintains off, it means the power break down. | |
Uplink MGC Downlink MGC |
Digital display panel will show the real-time gain, "+"increase gain,"-"decrease gain. |
|
SEL |
Select the different systems when you need, (only for Dual band, Tri band, Quad-band or Five band repeater.) |