Real-Time Outpower LCD 23dBm 5 Band 2g 3G 4G Signal Booster 800 900 1800 2100 2600MHz Mobile Phone Signal Booster for Europe

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Cable
• Model NO.: GW-23LGDWL-K
• Lightning Protection: With Lightning Protection
• Certification: ISO, RoHS, CE
• Condition: New
• Tri Band Repeater: Dcs1800+WCDMA2100+LTE2600
• Transport Package: Neutral Packing
• Specification: CE, RoHS
• Trademark: Greetwin
• Origin: Shenzhen
• HS Code: 8543709200
• Production Capacity: 2, 000PCS/Month
• Package Size: 44.00cm * 21.00cm * 10.50cm
• Package Gross Weight: 7.000kg
• Lead Time: 7 days (1 - 20 Pieces) ; 14 days (21 - 50 Pieces) ; 21 days (51 - 100 Pieces) ; To be negotiated ( > 100 Pieces)

Product Description

Real-time Outpower LCD 23dBm 5 band 2G 3G 4G Signal Booster 800 900 1800 2100 2600MHz Mobile Phone Signal Booster For Europe 

Model:
GW-10DWL, 10dBm
GW-15DWL, 15dBm
GW-20DWL, 20dBm
GW-23DWL, 23dBm
GW-27DWL, 27dBm
GW-30DWL, 30dBm

Tri-Band Signal Booster series is an ideal solution for three wireless system in small/medium businesses and home users looking to enhance indoor 2G&3G&4G wireless connectivity. It is connected via coaxial cable to Tri-Band Donor Antenna and Service Antenna, Tri-Band Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area.

Features:
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extention of the signal of base station. Optimization of the quality of the signal and source
3. Cover about 500~3000m² Without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wide band signal booster, or customize selective band booster.
7. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G etc

Recommended Accessories:
1)Donor antenna: Log Periodic Antenna (9dBi, 806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi, 806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)

Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop. Etc.
 

Frequency Range				Uplink	Downlink
LTE 800MHz				832-862MHz	791-821MHz
GSM 900MHz				890-915MHz	935-960MHz
CDMA 1800MHz				1710-1785MHz	1805-1880MHz
WCDMA 2100MHz				1920-1980MHz	2110-2170MHz
LTE 2600MHz				2500-2570MHz	2620-2690MHz
Gain				70dB±2dB	75dB±2dB
Output Power				18dBm±2dBm	23dBm±2dBm
Bandwidth				Wide Band
Manual Gain Control				31dB
ALC				>25dB
Ripple in Band				8dB
Noise Figure				≤ 6dB
VSWR				≤ 2.0
Intermodulation Products				≤ -40dBc
Spurious Emission	9KHz~1GHz			≤ -36dBm
	1~12.75GHz			≤ -30dBm
Time Delay				≤ 1.5 μs
Frequency stability				≤ 0.01ppm
MTBF				> 50000 hours
Impedance				50 ohm
Power Supply				AC 100-240V,DC 9V5A
Power LED				Power indicator
ISO(Alarm LED)		Red		AGC Alarm RED when ALC control 5dB-10dB ISO Alarm RED when ALC control 20dB-25dB, Then Repeater will Auto Shut Down. Auto restart after one minute.
		Green		Normal
Mechanical Specification
RF Connector			N-Female
Switch			Power Switch
Cooling			Heatsink Convection cooling
Humidity			< 90%
Operating Temperature			-20°C ~ +55°C
Environment Conditions			IP40
Installation Type			Wall Installation
Device Size			400*170*65mm
Package Weight			7Kg
Package Size			44*21*10.5CM

Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)

Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A.  Drill holes in the selected place and install expansion bolts.
B.  Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.

Connection:
A.  BTS Port: donor antenna cable is connected with Outdoor Port;
B.  MS Port: service whip antenna is connected with Indoor Port;
C.  DC IN connected with Power adaptor.

FAQ

Q1.Payment Method

T/T, Western Union, Paypal, and Credit Card are available,
and we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please us with more details.

Q2.Delivery Date&Lead Time

Quantity	Lead time	Delivery to American/Middle East/Asia/Europe
<50 pcs	7 business days	3-7 business days by DHL 5-7 business days by FedEx/UPS
100-200 pcs	15 business days
>200 pcs	24 business days

* it to get the sample.

Q3. Can I customize frequencies?

Yes, we can customize 2G/3G/4G/5G/GSM/CDMA/DCS/AWS/PCS/WCDMA/LTE,etc.

Q4. What should I do if I don't know about frequency in my country?

Please feel free to us with your inquiry, we will find the frequency you need and address your problems. 

Other Signal Repeater

More signal repeater please it!

 

Company Profile