| Type: | Signal Repeater |
|---|---|
| Transmission Medium: | Cable |
| Standard: | Standard |
| Lightning Protection: | With Lightning Protection |
| Certification: | ISO, RoHS, CE |
| Condition: | New |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Dual Systems 1800MHz WCDMA 2100MHz Cell Phone Signal Boosters Support 2G 3G 4G
Model. GW-17DW-VB
The aim of the cellular phone signal booster
The main aim of the cellular phone signal booster is taking the existing cell phone signal around your car, office, workstation or home and amplifying it. After amplification, the signal is rebroadcasted to the area with no reception or weak signal. Apart from consisting of an amplifier to boost the reception, external antenna and internal antenna, there're cell phone boosters with indoor antenna and amplifier as a single unit making them superb indoor cell phone signal boosters. In most cases the three components are detached. Other optional components include the Attenuator (reduces unwanted frequency signals), Lightning Surge Protector, Splitter and Tap.
Introduction:
Signal Booster GW-17DW-VB is designed to enhance and improve the quality of mobile 2G GSM900&1800MHz connection. There're black and white colors for options. The Led Indicator will show the current level of the input signal, which simplifies the installation of the external antenna. High quality aluminum shell provides an optimal cooling. This model, as simple in connection, installation and configuration, does not require special skills.
Specification:
| Frequency Range | Uplink | Downlink | |||
| DCS 1800MHz | 1710 - 1785MHz | 1805 - 1880MHz | |||
| WCDMA 2100MHz | 1920 - 1980MHz | 2110 - 2170MHz | |||
| Max. Gain | 65dB±2 | 70dB±2 | |||
| Max. Output Power | 15dBm | 17dBm | |||
| Band width | Wide Band | ||||
| Automatic Gain Control | >30dB | ||||
| Ripple in Band | 8dB; | ||||
| Noise Figure | ≤ 6dB | ||||
| VSWR | ≤ 2.0 | ||||
| Intermodulation Products | 9KHz~1GHz | ≤ -36dBm | |||
| 1~12.75GHz | ≤ -30dBm | ||||
| Spurious Emission | 9KHz~1GHz | ≤ -36dBm | |||
| 1~12.75GHz | ≤ -30dBm | ||||
| Time Delay | ≤ 1.5 μs | ||||
| Frequency stability | ≤ 0.01ppm | ||||
| MTBF | > 50000 hours | ||||
| Impedance | 50 ohm | ||||
| Power Supply | AC 90-264V,DC 6V/3A | ||||
| Power LED | Power indicator | ||||
| ISO(Alarm LED) | Red | Self oscillation or Strong input signal | |||
| Green | Normal | ||||
| Mechanical Specification | |||||
| RF Connector | N-Female | ||||
| Switch | Power Switch | ||||
| Cooling | Heatsink Convection cooling | ||||
| Humidity | < 90% | ||||
| Operating Temperature | -20°C ~ +55°C | ||||
| Environment Conditions | IP40 | ||||
| Installation Type | Wall Installation | ||||
| Size | 182mm×118mm×18mm | ||||
| Weight | < 1.2Kg | ||||
Other Frequencies for options:
| Frequency Range | Uplink | Downlink |
| EGSM900+DCS1800 | 880 - 915/1710 - 1785MHz | 925 - 960/1805-1880MHz |
| GSM900+PCS1900 | 890 - 915/1850 - 1910MHz | 935 - 960/1930-1990MHz |
| GSM900+ LTE2600 | 890 - 915/2500 - 2570MHz | 935 - 960/2620 - 2690MHz |
| EGSM900+ LTE2600 | 880 - 915/2500 - 2570MHz | 925 - 960/2620 - 2690MHz |
| GSM900+WCDMA | 890 - 915/1920 - 1980MHz | 935 - 960/2110 - 2170MHz |
| EGSM900+WCDMA | 880 - 915/1920 - 1980MHz | 925 - 960/2110 - 2170MHz |
| GSM850+PCS1900 | 824 - 849/1850 - 1910MHz | 869 - 894/1930 - 1990MHz |
| GSM850+ AWS1700 | 824 - 849/1710 - 1755MHz | 869 - 894/2110 - 2155MHz |
| CDMA800+WCDMA | 824 - 849/1920 - 1980MHz | 869 - 894/2110 - 2170MHz |
| CDMA800+ DCS1800 | 824 - 849/1710 - 1785MHz | 869 - 894/1805 - 1880MHz |
| DCS1800+ LTE2600 | 1710 - 1785/2500-2570MHz | 1805-1880/2620-2690MHz |
| WCDMA+ LTE2600 | 1920-1980/2500-2570MHz | 2110-2170/2620-2690MHz |
Features:
1. Coverage up to 500 m²
2. ALC Function
3. Simple in connection and installation
4. An optimal cooling with aluminum shell
5. Led indicators show working status and ISO alarm.
Support any cellular devices (voice & data & video)
FAQ:
1. After installing booster signal not be very good, indoor signal coverage very small ?
> Adjust outdoor antenna's location and direction
> Change another high gain outdoor antenna
> Check whether cables are connected well
> Change more powerful repeater
2. Cell phone signal full bar, but communication quality bad ?
> Much closer distance between indoor and outdoor antenna, separate them with a longer distance.
3. After installing booster not only signal be good, but also more bad ?
> Much closer distance between indoor and outdoor antenna, separate them with a longer distance.
4. Working good for long time, suddenly signal bad ?
> Check whether outdoor cable connectors are flooded
> Check whether power light is working normally
> If cables are not flooded and power light is working normally, the booster should has problems and need to be sent back to factory for repair.
Application:
Installation:
The booster is fixed onto the wall through expansion bolts.
A. Drill holes on the targeted place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.
Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN: connected with Power adaptor.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}