High Power 33dBm 900 1800 2100MHz B1 B3 B8 Mobile Signal Repeater 2G 3G 4G
High Power Repeater (Signal Booster) series is an ideal solution for small/medium businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has easy access to a BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area.
Features:
1. Cost-effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
3. Cover about 5000~8000m² without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wideband signal booster, or customize selective band booster.
7. Single system CDMA450, LTE800, iDEN, CDMA800,GSM,EGSM,AWS1700, DCS, PCS,
WCDMA, LTE2600,etc
8. Expansion and extension of the signal of the base station.
Optimization of the quality of the signal and source
Standard Package:
1) AC90-264V, DC12V power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
Recommended Accessories:
1)Donor antenna: Log Periodic Antenna (9dBi@806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi@806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)
Advantages:
1. Smart Function, Intelligent mode setting
smart function called which can be activated via the front panel.
users can adjust gain and choose working band by LCD panel, This smart function is easier than DIP Switch, can set up parameters, It is a simple, safe, and effective way.
2. Auto Level Control
The 30dB ALC is used to maintain steady output power even when the donor source signal fluctuates.
Application:
To expand signal coverage of fill signal blind area where the signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, etc.
| Frequency Range |
Uplink |
Downlink |
| EGSM900+LTE1800+WCDMA2100 |
880 - 915/ 1710-1785
1920 - 1980MHz |
925 - 960/ 1805-1880
2110 - 2170MHz |
| Max. Gain |
80dB |
85dB |
| Max. Output Power |
23dBm |
33dBm |
| Bandwidth |
Wide Band |
| Manual Gain Control |
31dB / 1dB Step |
| ALC |
>25dB |
| Ripple in-band |
≤ 6dB |
| Return loss |
≤ -10dB |
| Noise Figure |
≤ 6dB |
Spurious Emission
&Intermodulation |
9KHz~1GHz |
≤ -36dBm |
| 1~12.75GHz |
≤ -30dBm |
| WCDMA |
Spurious Emission Mask |
Meet 3GPP TS 25.143 ( V 6.2.0 ) |
|
Modulation Accuracy |
≤ 12.5% |
|
Peak Code Domain Error |
≤ -35dB@Spreading Factor 256 |
| Time Delay |
≤ 1.5 μs |
| Frequency stability |
≤ 0.01ppm |
| MTBF |
> 50000 hours |
| Power Supply |
AC100-240V,DC12V |
| Power LED |
Power indicator |
| Alarm LED |
Red |
Autoexcitation or High Power |
| Green |
Standard |
| Mechanical Specification |
| RF Connector |
N-Female |
| Switch |
Power Switch\Manual Gain Control Switch |
| Cooling |
Heatsink Convection cooling |
| Impedance |
50 ohm |
| Humidity |
< 90% |
| Operating Temperature |
-10°C~55°C |
| Environment Conditions |
IP40 |
| Size |
368mm*318mm*189mm |
| Weight |
< 15Kg |
Method of Installation
The booster is fixed onto the wall through expansion bolts.
A. Drill holes in the selected place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.
Connection
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN: connected with Power adaptor.
Audited Supplier 
){kind=link}
){kind=link}