33dBm 1900MHz Wireless Car Signal Booster Cell Phone Extender (GW-33CBP)
Model:
GW-33CBP
The Vehicle Booster is a very powerful signal amplifier for vehicle application and is compatible with all mobile phone networks. The external magnetic mount aerial connects via cable to the booster unit which is located inside the vehicle. The booster has an on-board whip aerial which re-transmits a strong and clear signal within the interior of the vehicle. This booster kit provides enhanced mobile coverage while traveling in low signal areas.
Feature:
1. Specially designed to resolve the problem of weak signal inside vehicle and yacht.
2. Elegant appearance, Light weight, low consumption, easy installation.
3. Effectively improve communication quality, reduce inside radiation.
4. Reduce mobile phone output power, pro-long mobile battery life.
5.33dBm uplink output, extend communication distance and enhance performance remarkably at mountain area, forests, high building area etc.
Standard package:
1) car power supply 1PCS
2) User manual 1PCS
Recommended Accessories:
1) Donor antenna: Magnetic antenna (2.5dBi, 824~960MHz/1710~1990MHz)
2) Service antenna: Attract antenna (2.5dBi, 824~960MHz/1710~1990MHz)
| Items |
Uplink |
Downlink |
| Frequency Range |
1710-1785MHz |
1805 - 1880 MHz |
| Max. Gain |
≥ 50dB |
≥ 45dB |
| Bandwidth |
Wide Band |
| Ripple in Band |
CDMA/GSM≤ 6dB; DCS/PCS≤ 8dB |
| Max. Input Power Without Damage |
25dBm |
0dBm |
| Output Power |
Tpy. |
≥ 33dBm |
≥ 0dBm |
| Min. |
≥ 26dBm |
| Spurious Emission |
9KHz~1GHz |
≤ -36dBm |
≤ -36dBm |
| 1GHz~12.75GHz |
≤ -30dBm |
≤ -30dBm |
| Noise Figure @ max. gain |
≤ 6dB(Typical) |
| Return loss |
≤ -8dB |
| Time Delay |
≤ 0.5μ s |
| MTBF |
> 50000hours |
| Power Supply |
DC: 12V2A |
| Power Consumption |
< 5W |
| Impedance |
50 ohm |
| Input Signal Levels |
-50dBm or more |
| LED Indication |
On: Green; Off: no light |
| RF Connector |
SMA-Female |
| Switch |
Power Switch |
| Cooling |
Heatsink Convection cooling |
| Dimensions (D x W xH ) |
133*92*25 (mm) |
| Weight |
< 0.7 Kg |
| Installation Type |
Wall Installation |
| Environment Conditions |
IP40 |
| Humidity |
< 90% |
| Operating Temperature |
-10º C ~ 55º C |
){kind=link}