Greetwin Ascom Tetra Repeater 30dBm 2g 3G 4G Repeater Cell Phone Signal Amplifier Iden 800MHz Single Band Mobile Signal Booster

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Cable
• Model NO.: GW-30C-ACS
• Standard: Standard
• Lightning Protection: Without Lightning Protection
• Certification: CE
• Condition: New
• Frequency Range: Uplink:806-824MHz/Downlink:851-869MHz
• Max. Gain: 80dB
• Max. Output Power: 30dBm
• RF Connector: N-Female
• Cooling: Heatsink Convection Cooling
• Operating Temperature: -10 C ~ +55 C
• Installation Type: Wall Installation
• Weight: 3.5kg
• Manual Gain Control: 31dB / 1dB Step
• Coverage: 8000sqm
• Alc: >25dB
• Transport Package: Carton
• Specification: 250*170*53mm
• Trademark: Greetwin
• Origin: China
• HS Code: 8529101000
• Production Capacity: 10000piece/Month

Product Description

Greetwin Tetra Repeater 30dBm 2G 3G 4G Repeater Cell Phone Signal Amplifier iDEN 800MHz Single Band Mobile Signal Booster

Frequency Range			Uplink		Downlink
IDEN800			806-824MHz		851-869MHz
Gain			75dB±2dB		80dB±2dB
Output Power			23dBm±2dBm		30dBm±2dBm
Band width			Wide Band
Manual Gain Control			31dB / 1dB Step
ALC			>25dB
Ripple in Band			≤ 8dB
Noise Figure			≤ 6dB
VSWR			≤ 2.0
Intermodulation			≤ -40dBc
Spurious Emission	9KHz~1GHz		≤ -36dBm
	1~12.75GHz		≤ -30dBm
Time Delay			≤ 1.5 μs
Frequency stability			≤ 0.01ppm
MTBF			> 50000 hours
Impedance			50 ohm
Power Supply			AC 90-264V,DC 9V/5A
Power LED			Power indicator
Alarm LED		Red	Self oscillation or Strong input signal
		Green	Normal
Mechanical Specification
RF Connector				N-Female
Switch				Power Switch,Manual Gain Control Switch
Cooling				Heatsink Convection cooling
Humidity				< 90%
Operating Temperature				-10°C ~ +55°C
Environment Conditions				IP40
Installation Type				Wall Installation
Size				250*170*53mm
Weight				3.5kg

 

Q: When I am home I have absolutely no service. it says extended. could the signal booster possibly work for me?

A: If you have service outside of your house such as on the street in front or back of your house then it will work if the booster is placed such that nothing is blocking it from the nearest tower for your service provider. If you have no service at all, even outside of your house, the booster will not work for you. In order to boost a signal it needs at least (a weak) signal to begin with. you need some type of signal outside your home to be able to boost it. If you have a weak signal outside and non-existent inside, the booster will work well and give you a good signal inside home no matter what construction material the house is.


Q: Can I use a 75 ohm cable to connect the signal booster with the antennas?
 

A: Yes, the signal booster can use the 75 ohm cable, but the attenuation is big. We recommend 50 ohm cable for the signal booster
for less gain loss and a better signal output