CDMA800MHz Indoor Mobile Phone Signal Booster for Office (GW-30C)
Model: GW-30C,
Description:
The family of signal repeaters for indoor (Signal Enhancer) is the ideal solution for wireless systems for small and medium businesses and home users seeking to improve wireless connectivity indoors. It is connected to the Donor Antenna and to the Service Antenna through a coaxial cable. The Donor Antenna is placed outside the building and provides easy access to BTS signals. The service antenna is placed inside the building and can extend the radio coverage to the blind spot. And automatic gain control (AGC) to avoid over-saturation of the reinforcement, thus maintaining a high quality of voice and avoiding the increase of interference in the network. The beautiful appearance and the ultra compact design make it attractive. In addition, it is easy to install and can install reinforcements for individual customers without the need for much experience and instrumentation.
The dual band improves the mobile signal and does not have a negative impact on human health.
Features:
1. Reduce call drop / off for low cost solutions in areas of weak signal.
2. Small size, low power consumption, easy installation and strong hiding power.
Extend and extend the signals of the base station.
Optimize the quality of signals and sources.
3. The coverage area is approximately 5000 ~ 8000m2, without obstructions or obstructions.
4. High linear design, design of ALC function, low interference to BTS.
5. Supports any cellular device (voice and data and video)
6. Broadband signal amplifier or customized selective band enhancer.
Benefits:
Digital display panel, intelligent mode configuration
The intelligent call function can be activated through the digital display panel.
The user can select the gain and work system through the LED digital panel.
The configuration of the technical parameters is simple and effective, which is easier than the DIP switch.
Standard package:
1) AC90-264V, DC 9V / 5A 1PCS power adapter
2) AC power cord (EU / US / UK / SA / China standard, etc.) 1PCS
3) 1PCS installation kit
4) 1PCS user manual
Recommended accessories:
1) Donor antenna: logarithmic period antenna (9dBi, 806-960 / 1710-2700MHz)
2) Service antenna: Omni ceiling antenna (3dBi, 806-960 / 1710-2700MHz)
3) 5D-FB coaxial cable with connector (optional cable length)
Application:
Extended signal coverage or dead zones of signal where the fill signal is weak or not available.
Interior: hotel, family, basement, shopping center, office, parking, Shop.etc.
Specification.
Frequency Range |
Uplink |
Downlink |
CDMA800MHz |
824-849MHz |
869-894MHz |
Max. Gain |
75dB±2 |
80dB±2 |
Max. Output Power |
27dBm±2 |
30dBm±2 |
Band width |
Wide Band |
Manual Gain Control |
31dB / 1dB Step |
Automatic Gain Control |
>30dB |
Ripple in Band |
≤ 2dB |
Noise Figure |
≤ 6dB |
VSWR |
≤ 2.0 |
Intermodulation |
≤ -40dBc |
Spurious Emission |
9KHz~1GHz |
≤ -36dBm |
1~12.75GHz |
≤ -30dBm |
Time Delay |
≤ 1.5 μs |
Frequency stability |
≤ 0.01ppm |
MTBF |
> 50000 hours |
Impedance |
50 ohm |
Power Supply |
AC 90-264V,DC 9V/5A |
Power LED |
Power indicator |
Alarm LED |
Red |
Self oscillation or Strong input signal |
Green |
Normal |
Mechanical Specification |
RF Connector |
N-Female |
Switch |
Power Switch,Manual Gain Control Switch |
Cooling |
Heatsink Convection cooling |
Humidity |
< 90% |
Operating Temperature |
-10°C ~ +55°C |
Environment Conditions |
IP40 |
Installation Type |
Wall Installation |
Size |
268mm*58mm*189mm |
Weight |
< 4.1Kg |
Advantage:
POWER LED |
Green |
Normal |
Off |
DC power problem |
ALARM LED |
Green |
Sys-1,Sys-2 or Sys-3, working in linearity |
Red |
There are strong input signal or severe self oscillation. Attention: input signal level is too high or the space of donor antenna and service antenna is not enough. please adjust the gain, If the red light still turning on that means over accepting of donor antenna or strong interference, then please adjust the place of donor antenna. |
Off |
Repeater breaks down, Please re-plug in and check if Alarm LED turns red, if it is, please take measures to keep Alarm LED green; if it maintains off, it means the power break down. |
Uplink MGC Downlink MGC |
Digital display panel will show the real-time gain, "+"increase gain,"-"decrease gain.
|
SEL |
Select the different systems when you need, (only for Dual band, Tri band, Quad-band or Five band repeater.) |
Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)
Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A. Drill holes in the selected place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.
Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN connected with Power adaptor.
Q1.Payment Method
T/T, Western Union, Paypal, and Credit Card are available,
and we suggest paying by ****** Trade Assurance, the most favor, and security method.
*Other methods please Contact us with more details.
Q2.Delivery Date&Lead Time
Quantity |
Lead time |
Delivery to American/Middle East/Asia/Europe |
<20 pcs |
3-5 business days |
3-7 business days by DHL
5-7 business days by FedEx/UPS |
20-100 pcs |
7-15 business days |
>100 pcs |
15-24 business days |
*Click it to get the sample.
Q3. Can I customize frequencies?
Yes, we can customize 2G/3G/4G/5G/GSM/CDMA/DCS/AWS/PCS/WCDMA/LTE,etc.
Q4. What should I do if I don't know about frequency in my country?
Please feel free to Contact us with your inquiry, we will find the frequency you need and address your problems.
More signal repeater please CLICK it!
