Pre-Amplifier for Dcs1800 Repeater 20dBm Single Booster Good Helper of Repeaters

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Cable
• Model NO.: GW-20PA(DCS)
• Standard: Standard
• Lightning Protection: With Lightning Protection
• Certification: RoHS, CE
• Condition: New
• Pre Amplifier: Dcs1800
• Transport Package: Neutral
• Specification: High quality
• Trademark: Greetwin
• Origin: Shenzhen
• HS Code: 8543709200
• Production Capacity: 10000PCS/Month

Product Description

Pre-amplifier for DCS1800 repeater 20dBm single booster good helper of repeaters

GW-20PA(DCS)

1. Wide band pre-amplifier to support all signals
2. ETSI & 3GPP 3GPP2 standards
3. Enough UL power level of 20dBm to reach BTS
4. UL AGC 10dB range to ensure high linearity
5. UL IM3 meets with ETSI 3GPP 3GPP2 standards
6. Alarm LED's for error detection
7. Universal power range of 90V~265V
8. Elegant designlight weight low power consumption

Description:
Pre-amplifier is utilized when the input power of the repeater is weaker than the suitable power level, pre-amplifier will boost the input signals to a certain reasonable level, so that the repeater can reach its full output power for a much larger coverage size.
Pre-amplifier has also been largely deployed to assist the Pico repeater operation in rural areas. As it is known, the Pico repeater only gets 5~15dBm output power in UL, so when the repeater site is too far away from the BTS tower, the mobile phone signals would not be strong enough to go back. Typical phenomena is that people can see full bar signals on the mobile phone, but the phone calls can't be initiated. So a pre-amplifier with 20dBm output power in UL would increase the UL power level of the repeater so that the signals can reach BTS tower.
pre-amplifiers are available in single, dual and triple mobile band , i.e., not only we have pre-amplifier able to amplify one GSM900 band , but also a triple band  one to support GSM900, DCS and WCDMA at the same time.
It supports all current technologies of GSM850, GSM900, DCS, PCS; CDMA450, CDMA800, CDMA1900, CDMA2000, WCDMA2100 and AWS
Though it supports up to triple band , the pre-amplifiers are still compact size, elegantly looking with low power consumption.

Specifications:
 

Electrical specification		Uplink	Downlink
Frequency Range	CDMA800	824 ~ 849 MHz	869 ~ 894 MHz
	CDMA1900	1850 ~ 1910 MHz	1930 ~ 1990 MHz
	GSM850	824 ~ 849 MHz	869 ~ 894 MHz
	GSM900 & EGSM	880 ~ 915 MHz	925 ~ 960 MHz
	DCS	1710 ~ 1785 MHz	1805 ~ 1880 MHz
	PCS	1850 ~ 1910 MHz	1930 ~ 1990 MHz
	WCDMA	1920 ~ 1980 MHz	2110 ~ 2170 MHz
	AWS	1710 ~ 1755 MHz	2110 ~ 2155 MHz
MAX. Gain		≥ 15dB
Output Power		≥ 20dBm	≥ 0dBm
Band width (-3dB)		Wide band
Automatic Level Control		≥ 15dB
Noise Figure		--	≤ 6dB
Group Delay		≤ 1.5μs
Frequency stability		≤ 0.01ppm
LED  Alarm		Standard
Power LED		Power Indicator
ALC LED		Red @ ALC 15dB
Mechanical  Specifications		Standard
I /O Port		SMA-N Female
Impedance		50 ohm
Operating Temperature		-25ºC~+55ºC
Environment Conditions		IP40
Dimensions		204mm×128mm×27mm
Weight		≤ 1.5 Kg
Power Supply		Input AC90~264V,output DC9V / 3A

Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)

Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A.  Drill holes in the selected place and install expansion bolts.
B.  Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.

Connection:
A.  BTS Port: donor antenna cable is connected with Outdoor Port;
B.  MS Port: service whip antenna is connected with Indoor Port;
C.  DC IN connected with Power adaptor.

FAQ

Q1.Payment Method

T/T, Western Union, Paypal, and Credit Card are available,
and we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please us with more details.

Q2.Delivery Date&Lead Time

Quantity	Lead time	Delivery to American/Middle East/Asia/Europe
<20 pcs	3-5 business days	3-7 business days by DHL 5-7 business days by FedEx/UPS
20-100 pcs	7-15 business days
>100 pcs	15-24 business days

* it to get the sample.

Q3. Can I customize frequencies?

Yes, we can customize 2G/3G/4G/5G/GSM/CDMA/DCS/AWS/PCS/WCDMA/LTE,etc.

Q4. What should I do if I don't know about frequency in my country?

Please feel free to us with your inquiry, we will find the frequency you need and address your problems. 

Other Signal Repeater

More signal repeater please it!

 

Company Profile