Customization: | Available |
---|---|
Type: | Signal Repeater |
Transmission Medium: | Wireless |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
GW-WIFI2000P | |
Repeater | |
Repeater Model | GW-WIFI2000P |
Operating range | 2400~2500MHz |
Channel width | 20Mhz & 40Mhz |
Supported standards | IEEE 802.11b/g/n |
Operation mode | Bi-directional, half-duplex, time division duplex |
Connector type | To radio SMA female (hole inside); To antenna RP-SMA female (pin inside) |
Output power | 2000mW (33dBm) |
Input power | 0 ~ 20dBm |
Transmit gain | 13 - 16dB |
Receiver gain | ≤12dB |
Noise figure | ≤3.5dB typical |
Frequency response | ±1dB over operating range |
Power adapter | 6V/2A DC, 100~240V |
Operating temperature | -20°c to +70°c |
Operating humidity | Up to 75% relative humidity |
Material | Cast aluminum |
LED light | Power status LED and activity status LED |
Booster weight | 145g |
Booster size | 9.1 x 5.6 x 2.9cm |
Antenna | |
2.4GHz 6dBi omni whip antenna for WiFi Router/Booster | |
Compliant with 802.11b/g/n | |
Frequency Range | 2400-2483MHz |
Bandwidth | 83MHz |
Gain | 6dBi |
VSWR | ≤1.8 |
Polarization | Vertical |
Impedance | 50Ω |
Max power | 50W |
Lightning protection | DC ground |
Connection | RP SMA |
Product Size | Φ1.35*20.5cm |
Product Weight | 30g |
Color | black |
Cable | |
Cable Type | RG316 Coaxial cable pigtail |
Length | 20cm |
Impedanece | 50Ω |
Connectors | SMA male to RP-SMA male |