40dBm Lte700+GSM850+1900 Cellphone Signal Amplifier (GW-40LCP)

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Wireless
• Model NO.: GW-40LCP
• Lightning Protection: With Lightning Protection
• Certification: ISO
• Condition: New
• Tri Band Repeater: Lte700+GSM850+1900
• Transport Package: Neutral Packing
• Specification: CE, RoHS
• Trademark: Greetwin
• Origin: Shenzhen
• HS Code: 8543709200
• Production Capacity: 2, 000PCS/Month

Product Description

40dBm Lte700+GSM850+1900 Cellphone Signal Amplifier (GW-40LCP)
Model:
33dBm, GW-33LCP
37dBm, GW-37LCP
40dBm, GW-40LCP
43dBm, GW-43LCP


The Tri Band RF Repeater (RFR) is the kind of repeater used most frequently. It has a simple structure to transparently convey and amplify the wireless signal (at the same frequency) between the BTS (Base Transceiver Station) and mobiles in Dual wireless network.
The Tri Band RFR is working as a relay between the BTS and mobiles. It picks up the signal from the BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Coverage Antenna (or the Indoor Signal Distribution System) to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.


Features:
* Aluminum-alloy casing with IP65 protection has high resistance to dust, water and corroding;
* Highly selective channel selector can process multiple channels simultaneously;
* No interference to BTS by adopting linear amplifier with high gain and low noise;
* Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink;
* USB port provides a link to a notebook for local supervision or to the built-in wireless modem to communicate with the NMS (Network Management System) that can remotely supervise repeater's working status and download operational parameters to the repeater.

The RF Repeater is mainly applicable to such case:
*The repeater can find an installation place which can receive pure BTS signal at strong enough level and can meet the requirement of isolation to avoid self-oscillation;
*And the distance between the BTS and the area to be covered is 2km around.

Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, etc
Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, highways

FrequencyRange		Uplink	Downlink
GSM900+1800+3G		890- 915/1710 - 1785/ 1920 - 1980MHz	935 - 960/1805 - 1880/ 2110 - 2170MHz
EGSM900+1800+3G		880- 915/1710 - 1785/ 1920 - 1980MHz	925 - 960/1805 - 1880/ 2110 - 2170MHz
GSM900+1800+LTE2600		890- 915/1710 - 1785/ 2500 - 2570MHz	935 - 960/1805 - 1880/ 2620 - 2690MHz
GSM850+1900+AWS2100		824 - 849/1850 - 1910/ 1710 - 1755MHz	869 - 894/1930 - 1990/ 2110 - 2155MHz
GSM850+1900+LTE2600		824 - 849/1850 - 1910/ 2500 - 2570MHz	869 - 894/1930 - 1990/ 2620 - 2690MHz
1800+3G +LTE2600		1710 - 1785MHz/ 1920 - 1980MHz/ 2500 - 2570MHz	1805 - 1880MHz/ 2110 - 2170MHz/ 2620 - 2690MHz
LTE700+GSM850+1900		777 - 787/824 - 849/ 1850 - 1910MHz	746 - 756/869 - 894 1930 - 1990MHz
Max. Input Level (Non-Destructive)		-10dBm
Max. Output Power (customizable)		33-43dBm
Max. Gain		≥ 90dB
GainAdjustment Range		1~31 dB @ step of 1dB
Voltage Standing Wave Ratio (VSWR)		< 1.5
Spurious Emission	Within working band	≤ -15dBm/30kHz
	Out of working band (Δf > 2.5MHz)	9kHz~1GHz: ≤ -36dBm/30kHz
		1GHz~12.75GHz: ≤ -30dBm/30kHz
Noise Figure		≤ 5dB
In-Band Ripple		≤ 3dB
Third-Order Intermodulation		≤ -45dBc/30kHz (measured under rated output power)
System Delay		≤ 5.0μSec
I/O Impedance		50Ω
RF Connector		N-Type (Female) / changeable / bottom of casing
TemperatureRange		Operation: -25°C ~ +55°C / Storage: -30°C ~ +60°C
RelativeHumidity Range		≤ 95% (non condensing)
Power Supply (customizable)		DC -48V / AC 220V, 50/60Hz / AC 110V, 50/60Hz
Backup Power Supply (optional)		4 hours
Casing Level		IP65
Dimensions		750x500x340mm
Weight		60kg
NMS Monitoring Function (optional)		Real-time alarm for door status, temperature, power supply, LNA, VSWR, self-oscillation, etc. Remote control such as turn on/off, increasing/decreasing output power, etc. Real-time status for output/input power, UL/DL gain, all status of repeater etc.