Mini GSM 900MHz Cell Phone Cellular Booster Mobile Signal Amplifier Repeater

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Cable
• Model NO.: GW-23G-V
• Lightning Protection: With Lightning Protection
• Certification: ISO, RoHS, CE
• Condition: New
• Single Band: GSM 900MHz
• Product Name: Cellphone Signal Repeater
• Application: Office,Basement, Hotel
• Coverage: More Than 1000 M2
• Gain: 70dB ( 70/23 )
• Output Power: 23dBm ( 70/23 )
• Transport Package: Neutral Packing
• Specification: CE, RoHS
• Trademark: Greetwin
• Origin: Shenzhen
• HS Code: 8543709200
• Production Capacity: 2, 000PCS/Month

Product Description

        GSM 900MHz Cell Phone Cellular Booster Mobile Signal Amplifier Repeater

Model: GW-23G-V

Introduction                                                                                                              

Indoor Signal Booster series is an ideal solution for small/medium businesses and home users looking
to enhance indoor wireless connectivity. It is connected via coaxial cable to Donor Antenna and Service
Antenna, Donor Antenna is placed outside the building where it has easy access to a BTS signal, and the
Service Antenna is placed in the building where it can extend radio coverage to the blind area.


Specifications                                                                                                 
 

Frequency Range			Uplink		Downlink
WCDMA 2100 MHz			890 - 915MHz		935 - 960MHz
Max. Gain			65dB		70dB
Max. Output Power			20dBm		23dBm
Band width			Wide Band
Manual Gain Control			31dB / 1dB Step
Automatic Gain Control			>31dB
Ripple in Band			3dB;
Noise Figure			≤ 6dB
VSWR			≤ 2.0
Intermodulation Products	9KHz~1GHz		≤ -36dBm
	1~12.75GHz		≤ -30dBm
Spurious Emission	9KHz~1GHz		≤ -36dBm
	1~12.75GHz		≤ -30dBm
Time Delay			≤ 1.5 μs
Frequency stability			≤ 0.01ppm
MTBF			> 50000 hours
Impedance			50 ohm
Power Supply			AC 90-264V,DC 6V/3A
Power LED			Power indicator
ISO(Alarm LED)		Red	Self oscillation or Strong input signal
		Green	Normal
Mechanical Specification
RF Connector				N-Female
Switch				Power Switch
Cooling				Heatsink Convection cooling
Humidity				< 90%
Operating Temperature				-20°C ~ +55°C
Environment Conditions				IP40
Installation Type				Wall Installation
Size				118mm×90mm×18mm
Weight				< 0.5Kg

Features                                                                                                          

1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
3. Coverage up to 1000 m² without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wide band signal booster, or customize selective band booster.
    Antenna isolation testing,Prevent the oscillation
7. Support system CDMA450, LTE700, LTE800, iDEN, CDMA800/GSM850,
    GSM900, EGSM, AWS1700, DCS1800, PCS1900,WCDMA,etc

Product Show                                                                                                          








Instruction                                                                                                     

About POWER, Signal Bar, ISO, UL, DL indicators.

POWER LED	Green	Normal
	Off	DC power problem
Signal Bar	Off	Output power too small
Signal Bar	Green	Normal working
	Red	Working at Maximum ouput power
UL	Manual gain control of Uplink, 1=4dB, 2=8dB  Decrease 4dB, put down 1  Decrease 8dB, putdown 2  Decrease 12dB, putdown 1+2 together
DL	Manual gain control of Uplink, 1=4dB, 2=8dB  Decrease 4dB, put down 1  Decrease 8dB, putdown 2  Decrease 12dB, putdown 1+2 together
ISO(ALARM LED)	Green	It is working in linearity.
	Red	There are strong input signals or severe self oscillation. Please adjust the gain to see if it's too strong input signals; After that, if it's still red, that means much closer distance between indoor and outdoor antenna, please put them in longer distance between antennas.
MGC	UL	Uplink Gain Control
	DL	Downlink Gain Control

FAQ                                                                                                                     

1. After installing booster signal not be very good, indoor signal coverage very small ?
   > Adjust outdoor antenna's location and direction
   > Change another high gain outdoor antenna
   > Check whether cables are connected well
   > Change more powerful repeater

2. Cell phone signal full bar, but communication quality bad ?
   > Much closer distance between indoor and outdor antenna, separate them with a longer distance.

3. After installing booster not only signal be good, but also more bad ?
  > Much closer distance between indoor and outdor antenna, separate them with a longer distance.

4. Working good for long time, suddenly signal bad ?
  >  Check whether outdoor cable connectors are flooded
  >  Check whether power light is working normally
  >  If cables are not flooded and power light is working normally, the booster should has problems and need to be sent back to factory for repair.

Application