23dBm Egsm 900 /Dcs 1800 / WCDMA2100 Cell Phone Signal Booster Digital Repeater

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Cable
• Model NO.: GW-23DR-EDW
• Standard: Standard
• Lightning Protection: With Lightning Protection
• Certification: ISO, RoHS, CE
• Condition: New
• Power Consumption: 55W
• Environmental Conditions: IP40
• Input and Output Impedance: 50 Ohm
• Power Supply: AC 220V
• Transport Package: Neutral Packing
• Specification: ISO9001
• Trademark: Greetwin
• Origin: Shenzhen
• HS Code: 8517699000
• Production Capacity: 10, 000PCS/Month

Product Description

23dBm EGSM 900 /DCS 1800 / WCDMA2100 Cell Phone Signal Boosters with Digital Technology

Greetwin GW-23DR-EDW model is a tri band digital repeater supporting EGSM 900 / DCS 1800 / WCDMA 2100 MHz with 23dBm per band and has software-defined filtering for up to 4 sub-bands per band. Individual gain and ALC settings allow for homogeneous coverage and oscillation prevention.

Each sub-band can work independently without any influence with each other. It's designed to support one mobile system and help mobile operators to amplify their own mobile signals. It supports to adjust the sub-band and the channels by software to adapt to the operators' requirement s without any change on the hardware. The repeater is also equipped with OMT / OMC remote control and monitoring system allowing to configure and control the device operation remotely via PC or wireless modem (optional function). The built-in backup battery will ensure the operation of the device even with a sudden power failure (optional function).

 

Features:

    1. Stably working,low power consumption,fit in with industry standard

    2. Digital technology, many SAW filters ensures enough output level and out-band suppression.

    3. High isolation,strong compatibility,convection cooling,light weight, convenient installation.

    4. Local RJ45 monitoring and remote monitoring conform to communication monitoring protocol        standard, which is convenient for engineering commissioning and maintenance.

 

Equipment Compoments:

Digital repeaters main compoments as follows:

Copoments	Specifications	Quantity	Unit	Remarks
Main Master	NXWXSB201821230111	1	Piece
Network Line	1M*R45	1	Piece
Ground Wire	1.5mm²	1.5	Meter	Ended with metal   sheet
Expansion screw	M4*100mm	4	Piece
Mounting bracket	/	2	Piece
Mounting bracket   screw	M6*14mm	4	Piece
Whip Antenna	800~2700MHz	1	Piece	Used for Modem

Working Principle:

The principle of Digital Band Selective Repeater is the downlink signal received by the Donor Antenna of the base station shall be sent to a band selective filter via duplexer to be filtered and to be amplified by the downlink band selective amplifier to a proper level. The Coverage Antenna via a duplexer shall emit the downlink signal. Similarly, the signal received by the Re-transmission Antenna shall have its level adjusted to a regulated level by a uplink band selective amplifier after it is filtered. The Donor Antenna will emit it after it is filtered and sent to the duplexer.

Panel interface description:

            

No.	Items	Description
1	Baffle	Open it, SIM card socket and RJ45 interface inside
2	MODEM	SMA-female jack, connect to a whip antenna with SMA-male   jack
3	RUN	Power indicator
4	ANT	Indoor service antenna, SMA-female jack
5	BTS	Outdoor donor antenna, SMA-female jack
6	GND	Equipment grounding
7	AC	Power Supply: AC 220V

 

Specifications:

Options		Uplink			Downlink
Frequency   range	EGSM900	880-915MHz			925-960MHz
	GSM1800	1710-1785MHz			1805-1880MHz
	3G 2100	1920-1980MHz			2110-2170MHz
Bandwidth	EGSM900	4 sub-bands, each 0.2 ~ 10MHz, adjustable and adjustable within     the 900 MHz frequency range
	GSM1800	3 sub-bands, each 0.2 ~ 20MHz, configurable and adjustable within   the frequency range of 1800 MHz in 0.2 MHz increments
	3G 2100	4 subranges, each 0.2 ~ 15 MHz, adjustable and adjustable within   the frequency range of 2000 MHz in 0.2 MHz steps
Max. gain		70±2dB			75±2dB
Max output power		20±2dBm			23±2dBm
Manual gain control (step down)		≥31dB/1dB step
	1-10dB	≤1.0dB
	11-20dB	≤1.5dB
	21-30dB	≤2.0dB
VSWR	entrance	≤ 2.3
	exit	≤ 2.3
Noise factor		standard ≤ 8dB, Max. ≤ 9dB
Group delay		≤ 7us
Frequency   Error	EGSM900/GSM1800	≤ 0.05 ppm 3GPP TS 51.026 (V 13.0.0 )
Frequency   stability	3G 2100	± 0,01 ppm 3GPP TS 25.143 ( V 13.0.0 )
Function Elements
Moving   strip	EGSM900		The frequency subbands can be mobile within the range of 35MHz
	GSM1800		The frequency subbands can be mobile within the range of 75MHz
	3G 2100		The frequency subbands can be mobile within the range of 60MHz
Adjustable   bandwidth	EGSM900		The frequency subbands can be tuned from 0.2 MHz to the     maximum  10 MHz
	GSM1800		The frequency subbands can be tuned from 0.2 MHz to a maximum   of 20 MHz
	3G 2100		The frequency subbands can be tuned from 0.2 MHz to a maximum   of 15 MHz
LED   system   indicators	ALC is not active		---		Green
	ALC active <45dB		---		Flashing green 1 time / 3 seconds
	ALC active ≥ 45dB		---		Flashing green 1 time / 1 second
	ALC active (51dB)   ends		---		Blinks red 1 time / 1 second
LED control indicators	Start indicator		The monitoring module   is working correctly		Flashing green 1 time / 1 second
			The monitoring module   does not work correctly		Off
	Indicator modem		SIM card not inserted		Off
			SIM card inserted, but   no signal		Red
			SMS communication   mode		Flashing green 1 time / 1 second
			GPRS communication   mode		Blinking green 2 times / 1 second
			GPRS communication   error		Blinks red 1 time / 1 second
	Alarm indicator		No alarm items		Green
			There are elements of   anxiety		Red
			DC Failure		Off
Mechanical parameters
Connectors				N-Female
Dimensions				460mm(exclude connector 20mm)*200mm*80mm
The weight				9.1KG (with packing box, 10.72KG)
Type of instalation				Wall Mount
Grounding				External ground (housing)
Electrical parameters
Source of power				Incoming AC 100 ~ 240V, 50 ~ 60Hz, outgoing DC12V /   7A
Power Consumption				55W
Input and output impedance				50 Ohm
Environmental parameter
Working temperature				-25ºC ~ +55ºC
Environmental conditions				IP40
Software
Local monitoring				PC via Ethernet port
Remote monitoring				via SMS or GPRS (additional function)
Controlled parameters				Gain, Frequency, Repeater On / Off, Alarm
Monitoring parameters				Gain, frequency, repeater on / off, alarm message
Alarm				Repeater failure, power failure, ALC alarm (signal gain level), etc.

FAQ:
1. After installing booster signal not be very good, indoor signal coverage very small ?
> Adjust outdoor antenna's location and direction
> Change another high gain outdoor antenna
> Check whether cables are connected well
> Change more powerful repeater

2. Cell phone signal full bar, but communication quality bad ?
> Much closer distance between indoor and outdoor antenna, separate them with a longer distance.

3. After installing booster not only signal be good, but also more bad ?
> Much closer distance between indoor and outdoor antenna, separate them with a longer distance.

4. Working good for long time, suddenly signal bad ?
> Check whether outdoor cable connectors are flooded
> Check whether power light is working normally
> If cables are not flooded and power light is working normally, the booster should has problems and need to be sent back to factory for repair.

Application:

Installation:

The booster is fixed onto the wall through expansion bolts.
A. Drill holes on the targeted place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.

 

Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN: connected with Power adaptor.