| Customization: | Available |
|---|---|
| Type: | Signal Repeater |
| Transmission Medium: | Wireless |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
23dBm CDMA800 WCDMA Cell Phone Signal Boosters Dual Band for 3000
Signal booster kits provide enhanced 2G and 3G voice and data reception where reception is weak due to to distance from tower, topography, building materials or structural design.
This full-featured amplifier includes adjustable gain control with dials for each band and automatic shutdown for maximum flexibility. Ideal for large homes and small office buildings and warehouses with either low cellular signal or requiring large coverage.
In addition to mobile base stations, repeaters provide another possibility for network operators to enhance network performance and reduce dropped call rates, while minimizing operators' major concerns in terms of operating cost, impact on revenues and the return on investment.
We offer one of the most advanced repeater systems available today (main units and complete accessories), network consultation and installation services that allow you to optimize your network efficiency at low cost.
Description:
Indoor Dual Band Signal Repeater (Signal Booster) series is an ideal solution for both two wireless system in small/medium businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from over saturation, therefore maintaining a high voice quality and avoid adding interference to network. With good looking & super compact design also make it attractive. Besides, it is easy installation feature is also for individual customers to install the booster by themselves, and it does not need much professional knowledge and instrument.
Downtown areas of the cities, congested with many high-rise buildings are usually the weak or blind areas.
Do not dismantle machine, maintain or displace accessories by yourself, because in this way, the equipment may be damaged or even get an electric shock.
Eliminate dropped calls and increase data speeds with a signal booster.
Model:
GW-10CW, 10dBm
GW-15CW, 15dBm
GW-20CW, 20dBm
GW-23CW, 23dBm
GW-27CW, 27dBm
GW-30CW, 30dBm
Features:
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption,
3. easy installation, great cover.
4. Expansion and extending of the signal of base station.
5. Optimization of the quality of the signal and source
6. Cover about 500~3000m² without block or obstruct.
7. High linear design, ALC function design, low interference to BTS.
8. Support any cellular devices (voice & data & video)
9. Wide band signal booster, or customize selective band booster.
Advantages:
Digital Display Panel, Intelligent mode setting
Smart function called which can be activated via the digital display panel.
Users can choose gain and working system by LED Digital Panel.
Set the technical parameters simple and efficient, this is easier than DIP Switch.
Standard Package:
1) AC90-264V, DC9V/5A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)
Application:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.
Specification:
| Frequency Range | Uplink | Downlink | |||
| CDMA800+WCDMA | 824 - 849/1920 - 1980MHz | 869 - 894/2110 - 2170MHz | |||
| Max. Gain | 70dB | 75dB | |||
| Max. Output Power | 17dBm | 23dBm | |||
| Band width | Wide Band | ||||
| Manual Gain Control | 31dB / 1dB Step | ||||
| Automatic Gain Control | >30dB | ||||
| Ripple in Band | ≤8dB | ||||
| Noise Figure | ≤ 6dB | ||||
| VSWR | ≤ 2.0 | ||||
| Intermodulation Products | 9KHz~1GHz | ≤ -36dBm | |||
| 1~12.75GHz | ≤ -30dBm | ||||
| Spurious Emission | 9KHz~1GHz | ≤ -36dBm | |||
| 1~12.75GHz | ≤ -30dBm | ||||
| Time Delay | ≤ 1.5 μs | ||||
| Frequency stability | ≤ 0.01ppm | ||||
| MTBF | > 50000 hours | ||||
| Impedance | 50 ohm | ||||
| Power Supply | AC 90-264V,DC 9V/5A | ||||
| Power LED | Power indicator | ||||
| Alarm LED | Red | Self oscillation or Strong input signal | |||
| Green | Normal | ||||
| Mechanical Specification | |||||
| RF Connector | N-Female | ||||
| Switch | Power Switch | ||||
| Cooling | Heatsink Convection cooling | ||||
| Humidity | < 90% | ||||
| Operating Temperature | -20°C ~ +55°C | ||||
| Environment Conditions | IP40 | ||||
| Installation Type | Wall Installation | ||||
| Size | 268mm*58mm*189mm | ||||
| Weight | < 3.5Kg | ||||
Support dual band frequency:
| Frequency Range | Uplink | Downlink |
| GSM900+DCS1800 | 890 - 915/1710 - 1785MHz | 935 - 960/1805-1880MHz |
| EGSM900+DCS1800 | 880 - 915/1710 - 1785MHz | 925 - 960/1805-1880MHz |
| GSM900+PCS1900 | 890 - 915/1850 - 1910MHz | 935 - 960/1930-1990MHz |
| GSM900+ LTE2600 | 890 - 915/2500 - 2570MHz | 935 - 960/2620 - 2690MHz |
| EGSM900+ LTE2600 | 880 - 915/2500 - 2570MHz | 925 - 960/2620 - 2690MHz |
| GSM900+WCDMA | 890 - 915/1920 - 1980MHz | 935 - 960/2110 - 2170MHz |
| EGSM900+WCDMA | 880 - 915/1920 - 1980MHz | 925 - 960/2110 - 2170MHz |
| GSM850+PCS1900 | 824 - 849/1850 - 1910MHz | 869 - 894/1930 - 1990MHz |
| GSM850+ AWS1700 | 824 - 849/1710 - 1755MHz | 869 - 894/2110 - 2155MHz |
| CDMA800+WCDMA | 824 - 849/1920 - 1980MHz | 869 - 894/2110 - 2170MHz |
| CDMA800+ DCS1800 | 824 - 849/1710 - 1785MHz | 869 - 894/1805 - 1880MHz |
| LTE700(A/B)+PCS1900 | 698 - 716/1850 - 1910MHz | 728 - 746/1930 - 1990MHz |
| LTE700(C)+PCS1900 | 777 - 787/1850 - 1910MHz | 746 - 756/1930 - 1990MHz |
| LTE700(D)+PCS1900 | 788 - 798/1850 - 1910MHz | 758 - 768/1930 - 1990MHz |
| LTE700(A/B)+AWS1700 | 698 - 716/1710 - 1755MHz | 728 - 746/2110 - 2155MHz |
| LTE700(C)+AWS1700 | 777 - 787/1710 - 1755MHz | 746 - 756/2110 - 2155MHz |
| LTE700(D)+AWS1700 | 788 - 798/1710 - 1755MHz | 758 - 768/2110 - 2155MHz |
| LTE700+LTE2600 | 703 - 748/1710 - 1755MHz | 758 - 803/2110 - 2155MHz |
| iDEN+PCS1900 | 806 - 824/1850 - 1910MHz | 851 - 869/1930 - 1990MHz |
| iDEN+AWS1700 | 806 - 824/1710 - 1755MHz | 851 - 869/2110 - 2155MHz |
| LTE800+WCDMA | 832 - 862/1920 - 1980MHz | 791 - 821/2110 - 2170MHz |
| LTE800+LTE2600 | 832 - 862/2500-2570MHz | 791 - 821/2620 - 2690MHz |
| LTE800+GSM900 | 832 - 862/890 - 915MHz | 791 - 821/935 - 960MHz |
| LTE800+EGSM900 | 832 - 862/880 - 915MHz | 791 - 821/925 - 960MHz |
| DCS1800+WCDMA | 1710 - 1785/1920-1980MHz | 1805-1880/2110-2170MHz |
| DCS1800+ LTE2600 | 1710 - 1785/2500-2570MHz | 1805-1880/2620-2690MHz |
| WCDMA+ LTE2600 | 1920-1980/2500-2570MHz | 2110-2170/2620-2690MHz |
Application Diagram:
){kind=link}