10W Tetra400MHz Fiber Optical Repeater Mobile Repeater

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Optical Fiber
• Model NO.: GW-40FOR-400
• Standard: Standard
• Lightning Protection: With Lightning Protection
• Certification: ISO, RoHS, CE
• Condition: New
• Output Power (Customizable): 30~43 dBm (1~20 W)
• Transmission Distance: ≤ 20km
• Transport Package: Neutral Packing
• Specification: CE, RoHS
• Trademark: GREETWIN
• Origin: Shenzhen
• HS Code: 8543709200
• Production Capacity: 500PCS/Month

Product Description

                         10W Tetra400MHz Fiber Optical Repeater Mobile Repeater

The Tetra UHF VHF Signal Booster, It has a simple structure to transparently convey and amplify the wireless signal (at the same frequency) between the BTS (Base Transceiver Station) and mobiles in a Dual wireless network, it picks up the signal from the BTS via the Donor Antenna, linearly amplifies the signal, and then retransmits it via the Coverage Antenna (or the Indoor Signal Distribution System) to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.

Product Description

Working Principle:
When the repeat antenna receives uplink signals from a subscriber, the signals will undergo the processing of a low-noise amplifier, filter, and power amplifier first, and then be transmitted to the base station, thus accomplishing the connection between subscribers in the signal blind area and base station.
In this way, the blind areas are eliminated.
Considering receiving signal intensity and coverage size may vary with sites where the repeater is located, it is necessary to control the gain and output of the repeater.
Additionally, considering the fading effect in spatial signal transmission, auto amplitude fixing for output is required.
For this purpose, MGC and ALC circuits are included in the uplink/downlink channels.

I.Features:

1. Aluminum-alloy casing with IP65 protection has a high resistance to dust, water, and corroding
2. Low interference to BTS by adopting a linear amplifier with high gain and low noise
3. Adopting filter with high selectivity and low insertion loss eliminates interference between uplink and downlink
4. The USB port provides a link to a notebook for local supervision or to the built-in wireless modem to communicate with the NMS (Network Management System) that can remotely supervise the repeater's working status and download operational parameters to the repeater.

Items			Donor Unit	Remote Unit
Working Frequency (customizable)		Uplink	380~385MHz
		Downlink	390~395MHz
Transmission Distance			≤ 20km
Max. Input Level (Non-Destructive)			-10dBm
Output Power (customizable)			30~43 dBm (1~20 W)
Max. Gain			Cable-access: ≥ 65dB / Wireless-access: ≥ 85dB
Gain Adjustment Range			1~31dB @ step of 1dB
Voltage Standing Wave Ratio (VSWR)			< 1.5
Noise Figure			< 5dB (only for uplink)
In-Band Ripple			≤ 3dB p-p
Spurious Emission		Within working band	≤ -15dBm/30kHz
	Out of working band		9kHz~1GHz: ≤ -36dBm/30kHz
	(Δf > 2.5MHz)		1GHz~12.75GHz: ≤ -30dBm/30kHz
Third-Order Intermodulation			≤ -45dBc/30kHz (measured under rated output power)
System Delay			≤ 5.0μSec
I/O Impedance			50Ω
Fiber Optic Light Source			Laser unit (wavelength: 1310nm / 1550nm)
Optical Output Power			≥0dBm (1310nm) / ≥3dBm (1550nm)
Optical Receiver Sensitivity			≤ -25dBm
RF Connector			N-Type (Female) / changeable / bottom of casing
Temperature Range			Operation: -25°C ~ +55°C / Storage: -30°C ~ +60°C
Relative Humidity Range			≤ 95% (non condensing)
Power Supply (customizable)			DC 48V / AC 85V - 265V, 45Hz - 65Hz
Backup Power Supply (optional)			4 hours
Power Consumption			≤ 200W
Casing Level			IP65
Dimensions			418mm X 90mm X 290mm	630mm X 400mm X 230mm
Weight			30dBm: 8kg
			33~37dBm: 27kg
			37~43dBm: 35kg
Remote Monitoring/Control via NMS(optional)			Real-time alarm for door status, temperature, power supply, LNA, VSWR, self-oscillation, etc.
			Remote control such as turn on/off, increasing/decreasing output power, etc.
			Real-time status for output/input power, UL/DL gain, all status of repeater etc.
ALC & AGC			Supported

*Monitor Function

·Adjust the gain of the uplink and downlink.
·Set maximum output power of the uplink and downlink.
·Detect the operating temperature of the equipment.
·Detect the output power of the uplink amplifier and downlink amplifier.
·Detect input power of uplink and downlink.
·Check the uplink LNA and downlink LNA for working properly
·Check the uplink and downlink "frequency selective filter" for working properly.
·Check the uplink PA and downlink PA for working properly.
·Switch on and switch off the power amplifiers of uplink and downlink.
·Set the frequency of the uplink signal channel and downlink signal channel.
·Detect the VSWR of the downlink output antenna port. 

Application

To expand signal coverage or fill the signal blind area where the signal is weak or unavailable.

Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, …
Indoor: Hotels, exhibition centers, basements, shopping malls, offices, parking lots, … 

Installation Instructions

I.Site Survey before Installation

Before you install, the installer should contact the person responsible for the project, understand whether there are installed conditions in the installation site.

Specifically include Installation site, surroundings (Temperature and Humidity), power supply, and so on.
If qualified should go live on-site survey with related personnel. The repeater is designed that can working outdoors, operating temperature is -25ºC~65ºC, humidity is ≤95%, which can be adapted to most areas of the natural environment.

II.Recommended Environmental Requirements:

1.Installation area non-corrosive gases and fumes, Electromagnetic interference field strength ≤140dBμV/m(0.01MHz~110000MHz).
2.Mounting height should facilitate RF cable routing, cooling, safety, and maintenance.
3.Should provide a set of independent and stable 150VAC~290VAC(Nominal 220V/50Hz)AC Power. It must not be shared with other high-power appliances telecommunications equipment.
4.Lightning protection devices must be installed in the building, and it should have sufficient strength and stability.
5.There are grounding bar in the vicinity.

III.Installation Tools

Installation tool to use: Electric impact drill, iron hammer, pulleys, ropes, belts, helmets, ladders, screwdriver, hacksaw, knife, pliers, wrenches, compass, measuring tape, tweezers, electric iron, portable PC, 30dB directional coupler, spectrum analyzers, VSWR tester.

IV.Repeater installation

It can be a holding pole or wall mounting way. It should be installed in a ventilated place, vertically on a wall or mast to ensure good heat dissipation, if hanging on the wall, the upper part of the equipment to be considered more than 50cm from the ceiling, the lower part of the equipment needs more than 100cm from the floor.
 

V.Safety Instruction

   V.I.Antenna and Feeder Installation and Precautions

        1.Installation of antenna systems requires experienced professionals to complete.
        2.You can not install an antenna near power lines, which may be life-threatening.
        3.All exposed joints must use self-adhesive waterproof tape and electrical insulation tape seal securely.
    VII.Connect the Ground and Power Supply
        1. Equipment Grounding
            The equipment must be well grounded, there is a copper on the repeater wall chassis ground, use 4mm2 or thicker copper wire close to              the ground. Grounding wire should be as short as possible. When installed, the equipment grounding wire should be connect to the                      integrated grounding bar. Grounding resistance of requirements bar may be≤ 5Ω, ground connector require preservative treatment. 
        2. Connect the Power
            Connect 220V/50Hz AC power to the equipment power port terminal blocks, power line use 2mm2 cables, length less than 30m.
            For standby power requirement, the power must go through UPS, and then connect the UPS to the repeater power port terminal blocks.

*More Details please CLICK it!

Other Signal Repeater

More Mobile phone signal booster please it!

FAQ

Q1.Payment Method

T/T, Western Union, Paypal, and Credit Card are available,
and we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please us with more details.

Q2.Delivery Date&Lead Time

Quantity	Lead time	Delivery to American/Middle East/Asia/Europe
<20 pcs	3-5 business days	3-7 business days by DHL 5-7 business days by FedEx/UPS
20-100 pcs	7-15 business days
>100 pcs	15-24 business days

* it to get the sample.

Q3. Can I customize frequencies?

Yes, we can customize 2G/3G/4G,GSM850/CDMA450,GSM900,AWS1700,DCS1800,PCS1900,WCDMA2100,LTE700/800/2600,etc.

Q4. What should I do if I don't know about frequency in my country?

Please feel free to us with your inquiry, we will find the frequency you need and address your problems. 
 

Certifications

Company Profile

 

Customized Service

Frequency	2G,3G,4G
Multi-band	1-5 Bands
Output Power	17dBm-43dBm
Colors	Accept Customized
Logo	Accept Customized

*More Details please it to contact us!