33dBm Dual Band Dcs1800+3G Mobile Repeater Mobile Signal Amplifier (GW-33DW)

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Wireless
• Model NO.: GW-33DW
• Lightning Protection: With Lightning Protection
• Certification: ISO, RoHS, CE
• Condition: New
• Signal Repeater: Frequency Shift Repeater
• Coverage: 8-10km
• Output Power: 33dBm
• Frequency: GSM/Egsm/CDMA/Dcs/PCS/WCDMA/Lte
• Quality Warranty: 12 Months
• Outdoor Repeater: IP65
• Transport Package: Neutral Packing
• Specification: CE, RoHS
• Trademark: Greetwin
• Origin: Shenzhen
• HS Code: 8543709200
• Production Capacity: 2, 000PCS/Month

Product Description

33dBm Moblie Repeater /Wireless Cell Phone Booster /Mobile Signal Amplifier DCS1800+3G
 

Features:
· Aluminum-alloy casing has a high resistance to dust, water, and corroding;
· No stringent isolation requirement for antenna installation;
· Adopting WDM (Wavelength Division Multiplexing) module to realize long-distance transmission;
· USB port provides a link to a notebook for local supervision or to the built-in wireless modem to communicate with the NMS (Network Management System) that can remotely supervise the repeater's working status and download operational parameters to the repeater.

The Frequency Shift Repeater (FSR) is designed to solve problems of weak mobile signal, which can expand more coverage than RF repeater and reduce investment for the areas where fiber optic cable is not available.
The whole FSR system consists of two parts: The donor Unit and Remote Unit. They transparently convey and amplify the wireless signal between the BTS (Base Transceiver Station) and mobiles via RF wave at different frequencies from the BTS.
The Donor unit receives the BTS signal via a direct coupler closed to the BTS (or via open-air RF transmission through the Donor Antenna), then converts it from the working frequency to the link frequency, and transmits the amplified signal to the Remote Unit via the Link Antennas. The Remote Unit will reconvert the signal to the working frequency and provide the signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.
As per the method of receiving BTS signal by the Donor Unit, two types of FSR are available:
* Cable-Access FSR: To receive BTS signal via a direct coupler closed to the BTS (recommended);
* Wireless-Access FSR: To receive a BTS signal via a Donor Antenna (applicable when no line of sight can be viewed between the Donor Unit and the Remote Unit as the Donor Unit is installed on the BTS tower).

And both types of FSR can be sorted into 2 sub-categories as per the availability of link frequency:
* In-Band FSR: The link frequency is within the working band of BTS;
* Out-of-Band FSR: The link frequency is out of the working band of BTS.

Application:
To expand signal coverage or fill the signal blind area where the signal is weak or unavailable.
· Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, highways
· Indoor: Hotels, exhibition centers, basements, shopping malls, offices, parking lots.

The FSR is mainly applicable to such case:

The area to be covered is far away from the BTS and has no fiber optic connection;
The distance between the BTS and the area to be covered is 20 km around.
In comparison with RFR (RF repeater) and FOR (fiber optic repeater), the FSR has the following benefits and disadvantages:

Pro:
· No more self-oscillation and easy to choose installation location;
· For Cable-Access type, pure BTS signal picked up by the Donor Unit will greatly reduce the signal noise;
· The Remote Unit can be installed out of the BTS coverage;
· A full 360-degree coverage can be realized;

Con:
· The total cost of equipment is higher;
· A certain frequency resource is required to be occupied as the Link Frequency;
A line of sight shall be viewable between the Link Antennas.

		DCS1800	3G
Working Frequency (customizable)	Uplink (MHz)	1710- 1785	1920- 1980
	Downlink (MHz)	1805- 1880	2110- 2170
Working Bandwidth		75 MHz	60 MHz
Max. Input Level (Non-Destructive)		-10dBm
Max. Output Power (customizable)		33-43dBm
Max. Gain		≥ 90dB
Gain Adjustment Range		1~31 dB @ step of 1dB
Voltage Standing Wave Ratio (VSWR)		< 1.5
Spurious Emission	Within working band	≤ -15dBm/30kHz
	Out of working band (Δf > 2.5MHz)	9kHz~1GHz: ≤ -36dBm/30kHz
		1GHz~12.75GHz: ≤ -30dBm/30kHz
Noise Figure		≤ 5dB
In-Band Ripple		≤ 3dB
Third-Order Intermodulation		≤ -45dBc/30kHz (measured under rated output power)
System Delay		≤ 5.0μSec
I/O Impedance		50Ω
RF Connector		N-Type (Female) / changeable / bottom of casing
Temperature Range		Operation: -25°C ~ +55°C / Storage: -30°C ~ +60°C
Relative Humidity Range		≤ 95% (non condensing)
Power Supply (customizable)		DC -48V / AC 220V, 50/60Hz / AC 110V, 50/60Hz
Power Consumption		≤ 250W
Backup Power Supply (optional)		4 hours
Casing Level		IP65
Dimensions		550mm X 440mm X 235mm
Weight		50kg
NMS Monitoring Function (optional)		Real-time alarm for door status, temperature, power supply, LNA, VSWR, self-oscillation, etc. Remote control such as turn on/off, increasing/decreasing output power, etc. Real-time status for output/input power, UL/DL gain, all status of repeater etc.

Q1. Could I get a sample before bulk order?

Yes, we offer the sample for all models but charged.

Q2. What should I do if I don't know about frequency in my country?

Please feel free to contact us with your inquiry, we will find the frequency you need and address your problems. 

Q3. Do you accept OEM/ODM order?

Yes, we can customize the brand logo, colors, and frequencies.

Q4.Shipment Date

Sample	3-5 business days
<20 pcs	7-15 days
20-50 pcs	15-24 days
>50 pcs	Negotiate

Q5: Delivery Date of the sample by DHL/FedEx

USA/Canada/Europe/Asia	3-5 days
Middle East/Latin American	5-7 days
African	3-7 days

Q6.Payment Method

T/T, Western Union, Paypal, and Credit Card are available,
but we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please contact us with more details.

Q7.Others
(1)Frequency
We can customize Single/Double/Triple/Quand/Penta Band for cellphone signal like 2G/3G/4G(GSM/CDMA/DCS/PCS/WCDMA/LTE, etc,)
(2)Output Power &Coverage Areas

Output Power	Coverage Areas
20dBm	500-1500m²
23dBm	1500-2500m²
25dBm	2500-4000m²
27dBm	3000-5000m²
30dBm	5000-8000m²

*Coverage is related to local signal strength, please contact us with your local condition, we can offer the best solution.
(3)Antenna
Cellphone signal booster must attach one indoor antenna and one outdoor antenna by two coaxial cables.
Website's price only includes a signal booster, please contact us if you need one set of devices with antenna, splitter, and coupler.