23dBm GSM900MHz LTE 1800MHz GSM Signal Repeater Booster 2g 3g 4g Mobile Phone Signal Booster
Model: GW-23GD-V
Indoor Dual Band Signal Repeater (Signal Booster) series is an ideal solution for both two wireless system in small/medium businesses and home users looking to enhance indoor 2G&3G wireless connectivity. It is connected via coaxial cable to Dual Band Donor Antenna and Service Antenna, Dual Band Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from over saturation, therefore maintaining a high voice quality and avoid adding interference to network. With good looking & super compact design also make it attractive. Besides, it is easy installation feature is also for individual customers to install the booster by themselves, and it does not need much professional knowledge and instrument.
The dualband improves mobile signals with no negative impact on human health.
Standard Package:
1) AC90-264V, DC9V/5A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
Recommended Accessories:
1)Donor antenna: Log Periodic Antenna (9dBi, 806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi, 806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)
Features:
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extention of the signal of base station. Optimization of the quality of the signal and source
3. Cover about 800~1500m² Without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wide band signal booster, or customize selective band booster.
7. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G etc
Advantages:
1. Smart Function, Intelligent mode setting
smart function called which can be activated via the front panel.
users can adjust gain and choose working band by LED panel, This smart function is easier than DIP Switch, can set up parameters,It is a simple, safe and effective way.
2. Auto Level Control
The 30dB ALC is used to maintain steady output power even when the donor source signal fluctuates.
Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop. Etc.
| Frequency Range |
Uplink |
Downlink |
| GSM 900 |
890-915MHz |
935-960MHz |
| DCS1800 |
1710-1785MHz |
1805-1880MHz |
| Gain |
65dB±2dB |
70dB±2dB |
| Output Power |
20dBm±2dBm |
23dBm±2dBm |
| Band width |
Wide Band |
| ALC |
≥ 25dB |
| Ripple in Band |
8dB |
| Noise Figure |
≤ 6dB |
| VSWR |
≤ 2.0 |
| Intermodulation Products |
≤ -40dBc |
| Spurious Emission |
9KHz~1GHz |
≤ -36dBm/30KHz |
| 1~12.75GHz |
≤ -30dBm/30KHz |
| Time Delay |
≤ 1.5 μs |
| Frequency stability |
≤ 0.01ppm |
| MTBF |
> 50000 hours |
| Impedance |
50Ω |
| Power Supply |
AC 90-264V, DC 9V/3A |
| Power LED |
Power indicator |
| Alarm LED |
Red |
Self oscillation or Strong input signal |
| Green |
Normal |
| Mechanical Specification |
| RF Connector |
N-Female |
| Cooling |
Heatsink Convection cooling |
| Humidity |
< 90% |
| Operating Temperature |
-10°C ~ +55°C |
| Environment Conditions |
IP40(Indoor) |
| Installation Type |
Wall Installation |
| Size |
118mm*91mm*30mm |
| Weight |
< 0.8Kg |
Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)
Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A. Drill holes in the selected place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.
Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN connected with Power adaptor.
Q1.Payment Method
T/T, Western Union, Paypal, and Credit Card are available,
and we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please Contact us with more details.
Q2.Delivery Date&Lead Time
| Quantity |
Lead time |
Delivery to American/Middle East/Asia/Europe |
| <20 pcs |
3-5 business days |
3-7 business days by DHL
5-7 business days by FedEx/UPS |
| 20-100 pcs |
7-15 business days |
| >100 pcs |
15-24 business days |
*Click it to get the sample.
Q3. Can I customize frequencies?
Yes, we can customize 2G/3G/4G/5G/GSM/CDMA/DCS/AWS/PCS/WCDMA/LTE,etc.
Q4. What should I do if I don't know about frequency in my country?
Please feel free to Contact us with your inquiry, we will find the frequency you need and address your problems.
More signal repeater please CLICK it!
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}