| Type: | Signal Repeater |
|---|---|
| Transmission Medium: | Cable |
| Standard: | Standard |
| Lightning Protection: | With Lightning Protection |
| Certification: | ISO |
| Condition: | New |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 27dBm Frequencies Selective Cell Phone Signal Amplifier Mobile Phone Signal Repeater GSM Signal Booster
Because of the shade of the mountains, most tunnels are blind zones. To cover the signal uninterruptedly of the road, the railway and the highway, the main problem is that the tunnel is in a closed structure, narrow space, and the zonal distribution of the network signal, when the mobile station switch and reselect fast and frequently and the terminals move in a high speed , it will bring the Doppler effects.
GSM900MHz Band selective repeater is Analog type, designed for installations in offices, warehouses, factories, shopping malls and business centers. It is easy to install, offers high call quality, high gain, a simple prompt software setup makes installation of this repeater an easy plug and play task. With the control panel in front of the repeater, the repeater status can be known during installation.
Fixed Band can suitable for Special operator, not disturb other operator frequency.
Eliminate dropped calls and increase data speeds with a signal booster.
It is connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from over saturation, therefore maintaining a high voice quality and avoid adding interference to network. With good looking & super compact design also make it attractive. Besides, it is easy installation feature is also for individual customers to install the booster by themselves, and it does not need much professional knowledge and instrument.
Downtown areas of the cities, congested with many high-rise buildings are usually the weak or blind areas.
Do not dismantle machine, maintain or displace accessories by yourself, because in this way, the equipment may be damaged or even get an electric shock.
Specifications:
| Frequency Range | Uplink | Downlink | |||
| GSM 900 | 890-915MHz | 935-960MHz | |||
| GSM850 | 824-849MHz | 869-894MHz | |||
| Gain | 75dB | 80dB | |||
| Max. Output Power | 23dBm | 27dBm | |||
| Band width | 25MHz | ||||
| Manual Gain Control | 31dB / 1dB Step | ||||
| Automatic Gain Control | >30dB | ||||
| Ripple in Band | ≤ 3dB | ||||
| Noise Figure | ≤ 6dB | ||||
| VSWR | ≤ 2.0 | ||||
| Intermodulation Products | 9KHz~1GHz | ≤ -36dBm | |||
| 1~12.75GHz | ≤ -30dBm | ||||
| Spurious Emission | 9KHz~1GHz | ≤ -36dBm | |||
| 1~12.75GHz | ≤ -30dBm | ||||
| Time Delay | ≤ 1.5 μs | ||||
| Frequency stability | ≤ 0.01ppm | ||||
| MTBF | > 50000 hours | ||||
| Impedance | 50 ohm | ||||
| Power Supply | AC 90-264V,DC 9V/5A | ||||
| Power LED | Power indicator | ||||
| Alarm LED | Red | Self oscillation or Strong input signal | |||
| Green | Normal | ||||
| Mechanical Specification | |||||
| RF Connector | N-Female | ||||
| Switch | Power Switch | ||||
| Cooling | Heatsink Convection cooling | ||||
| Humidity | < 90% | ||||
| Operating Temperature | -20°C ~ +55°C | ||||
| Environment Conditions | IP40 | ||||
| Installation Type | Wall Installation | ||||
| Size | 268mm*58mm*239mm | ||||
| Weight | < 3.5Kg | ||||
Features:
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption,
3. easy installation, great cover.
4. Expansion and extending of the signal of base station.
5. Optimization of the quality of the signal and source.
6. Cover about 3000~5000m² without block or obstruct.
7. High linear design, ALC function design, low interference to BTS.
8. Support any cellular devices (voice & data & video)
9. Wide band signal booster, or customize selective band booster.
Advantages:
Digital Display Panel, Intelligent mode setting
Smart function called which can be activated via the digital display panel.
Users can choose gain and working system by LED Digital Panel.
Set the technical parameters simple and efficient, this is easier than DIP Switch.
Standard Package:
1) AC90-264V, DC9V/5A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)
Application:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.
Model:
GW-10GS, 10dBm
GW-15GS, 15dBm
GW-20GS, 20dBm
GW-23GS, 23dBm
GW-27GS, 27dBm
GW-30GS, 30dBm
Support frequency range:
| Frequency Range | Uplink | Downlink |
| CDMA 450 | 452.5 - 457.5MHz | 462.5 - 467.5MHz |
| LTE700 A/B | 703-748MHz | 758-803 MHz |
| LTE700 C | 777- 787MHz | 746- 756MHz |
| LTE700 D | 788- 798MHz | 758- 768MHz |
| LTE 800 | 832- 862MHz | 791- 821MHz |
| iDEN | 806- 824MHz | 851- 869MHz |
| CDMA 800/GSM 850 | 824- 849MHz | 869- 894MHz |
| GSM 900 | 890- 915MHz | 935- 960MHz |
| EGSM | 880 - 915MHz | 925 - 960MHz |
| AWS1700 | 1710- 1755MHz | 2110- 2155MHz |
| DCS 1800 | 1710- 1785MHz | 1805- 1880MHz |
| PCS 1900 | 1850- 1910MHz | 1930- 1990MHz |
| WCDMA/3G 2100 | 1920- 1980MHz | 2110- 2170MHz |
| LTE 2600 | 2500- 2570MHz | 2620- 2690MHz |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}