23dBm GSM900MHz WCDMA2100MHz GSM Signal Repeater Booster 2g 3g 4g Mobile Phone Signal Booster
A cell phone signal booster (also known as amplifier or repeater) is made up of three main elements - exterior antenna, amplifier, and interior antenna. They form a wireless system to boost cellular reception.
A cell phone reception booster is generally a repeater system that involves the amplifier adding gain or power to the reception in various directions. Even for a cheap cell phone signal booster, maximum gain differs by application. The work of an outside antenna is to both receive and transmit signal to a cellular tower with enhanced power and sensitivity. Usually the dB gain is never below 7 dB and can be over 10 dB gain. The system's elements conduit is the coaxial cable. It is also a factor in transmission loss.
The main aim of the cellular phone signal booster is taking the existing cell phone signal around your car, office, workstation or home and amplifying it. After amplification, the signal is rebroadcasted to the area with no reception or weak signal. Apart from consisting of an amplifier to boost the reception, external antenna and internal antenna, there're cell phone boosters with indoor antenna and amplifier as a single unit making them superb indoor cell phone signal boosters. In most cases the three components are detached. Other optional components include the Attenuator (reduces unwanted frequency signals), Lightning Surge Protector, Splitter, and Tap.
Production Information
Features:
1. Cost-effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extension of the signal of the base station. Optimization of the quality of the signal and source
3. Cover about 800~1500m² Without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wideband signal booster, or customize selective band booster.
7. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G etc
Advantages:
1. Smart Function, Intelligent mode setting
smart function called which can be activated via the front panel.
users can adjust gain and choose working band by LED panel, This smart function is easier than DIP Switch, can set up parameters, It is a simple, safe, and effective way.
2. Auto Level Control
The 31dB ALC is used to maintain steady output power even when the donor source signal fluctuates.
3.ODM/OEM service is available.
A Full Set Of Package:
1)1pcs*signal booster
2)1pcs*indoor antenna
3)1pcs*outdoor antenna
4)1pcs*power adapter
Parameter
| Frequency Range |
Uplink |
Downlink |
| GSM 900 |
890-915MHz |
935-960MHz |
| DCS1800MHz |
1747-1785MHz |
1805-1880MHz |
| Gain |
65dB±2dB |
70dB±2dB |
| Output Power |
20dBm±2dBm |
23dBm±2dBm |
| Bandwidth |
Wide Band |
| ALC |
≥ 20dB |
| Ripple in Band |
8dB |
| Noise Figure |
≤ 6dB |
| VSWR |
≤ 2.0 |
| Intermodulation Products |
≤ -40dBc |
| Spurious Emission |
9KHz~1GHz |
≤ -36dBm/30KHz |
| 1~12.75GHz |
≤ -30dBm/30KHz |
| Time Delay |
≤ 1.5 μs |
| Frequency stability |
≤ 0.01ppm |
| MTBF |
> 50000 hours |
| Impedance |
50Ω |
| Power Supply |
AC 90-264V,DC 6V/3A |
| Power LED |
Power indicator |
| Alarm LED |
Red |
Self-oscillation or Strong input signal |
| Green |
Normal |
| Mechanical Specification |
| RF Connector |
N-Female |
| Cooling |
Heatsink Convection cooling |
| Humidity |
< 90% |
| Operating Temperature |
-10°C ~ +55°C |
| Environment Conditions |
IP40(Indoor) |
| Installation Type |
Wall Installation |
| Size |
117*90*34mm |
| Gross Weight |
< 1.2 Kg |
Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A. Drill holes in the selected place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.
Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN: connected with Power adaptor.
Q1. Could I get a sample before bulk order?
Yes, we offer the sample for all models but charged.
Q2. What should I do if I don't know about frequency in my country?
Please feel free to contact us with your inquiry, we will find the frequency you need and address your problems.
Q3. Do you accept OEM/ODM order?
Yes, we can customize the brand logo, colors, and frequencies.
Q4.Shipment Date
| Sample |
3-5 business days |
| <20 pcs |
7-15 days |
| 20-50 pcs |
15-24 days |
| >50 pcs |
Negotiate |
Q5: Delivery Date of the sample by DHL/FedEx
| USA/Canada/Europe/Asia |
3-5 days |
| Middle East/Latin American |
5-7 days |
| African |
3-7 days |
Q6.Payment Method
T/T, Western Union, Paypal, and Credit Card are available,
but we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please contact us with more details.
Q7.Others
(1)Frequency
We can customize Single/Double/Triple/Quand/Penta Band for cellphone signal like 2G/3G/4G(GSM/CDMA/DCS/PCS/WCDMA/LTE, etc,)
(2)Output Power &Coverage Areas
| Output Power |
Coverage Areas |
| 20dBm |
500-1500m² |
| 23dBm |
800-1500m² |
| 25dBm |
2500-4000m² |
| 27dBm |
3000-5000m² |
| 30dBm |
5000-8000m² |
*Coverage is related to local signal strength, please contact us with your local condition, we can offer the best solution.
(3)Antenna
Cellphone signal booster must attach one indoor antenna and one outdoor antenna by two coaxial cables.
Website's price only includes a signal booster, please contact us if you need one set of devices with antenna, splitter, and coupler.
){kind=link}