High Power 2W Tetra 400MHz Band Selective Wireless Mobile Phone Signal Booster (GW-33BSRT)

• Type: Signal Repeater
• Transmission Medium: Optical Fiber
• Standard: Standard
• Lightning Protection: With Lightning Protection
• Certification: ISO, RoHS, CE
• Condition: New
• Model NO.: GW-33BSRT
• Max Output: 43dBm
• Coverage: 10-15km
• Output Power: 2W
• Frequency: GSM/Egsm/CDMA/Dcs/PCS/WCDMA/Lte
• Customized Service: Accept Frequency/Logo Customized
• Quality Warranty: 12 Months
• Gross Weight: 25-30kg
• Outdoor Repeater: IP65
• Transport Package: Neutral Packing
• Specification: CE, RoHS
• Trademark: Greetwin/Customized
• Origin: Shenzhen
• HS Code: 8543709200
• Production Capacity: 2, 000PCS/Month

Product Description

High Power 2W Tetra 400MHz Band Selective Repeater Wireless Signal Booster for House (GW-33BSRT)

Features:
* Aluminum-alloy casing with IP65 protection has a high resistance to dust, water, and corroding;
* Highly selective channel selector can process multiple channels simultaneously;
* No interference to BTS by adopting a linear amplifier with high gain and low noise;
* Adopting filter with high selectivity and low insertion loss eliminates interference between uplink and downlink;
* USB port provides a link to a notebook for local supervision or to the built-in wireless modem to communicate with the NMS (Network Management System) that can remotely supervise the repeater's working status and download operational parameters to the repeater.
Support 410-414Mhz, 420-424Mhz, etc.

The RF Repeater is mainly applicable to such case:
*The repeater can find an installation place which can receive pure BTS signal at a strong enough level and can meet the requirement of isolation to avoid self-oscillation;
*And the distance between the BTS and the area to be covered is 2km around.

In comparison with FSR (frequency shift repeater) and FOR (fiber optic repeater), the RFR has the following benefits and disadvantages:
Pro:
Easy to build the installation site;
Lower cost of equipment and site-building.

Con:
*Inappropriate installation may cause self-oscillation;
*The Coverage Antenna shall face against the Donor Antenna, which limits the coverage angle;
* High signal noise may be introduced since the Donor Antenna picks up the signal from the air;
*The repeater shall be installed within the coverage of BTS.

		Uplink	Downlink
Working Frequency (customizable)		380~385 MHz	390~395 MHz
Working Bandwidth (customizable)		5MHz
Max. Input Level (Non-Destructive)		-10dBm
Max. Output Power (customizable)		30dBm	43dBm
Max. Gain		90dB±2dB	90dB±2dB
Gain Adjustment Range		1~31dB @ step of 1dB
Auto Level Control (ALC)		> 20dB
Voltage Standing Wave Ratio (VSWR)		≤ 1.5
Noise Figure		≤ 5dB
In-Band Ripple		≤ 3dB
Phase P-P Error		≤ 20
RMS Phase Error		≤ 5
Spurious Emission	Within working band	≤ -22dBm/30kHz
	Out of working band	9kHz~1GHz: ≤ -36dBm/30kHz 1GHz: ≤ -30dBm/30kHz
Third-Order Intermodulation	Within working band	≤ -45dBc/30kHz	≤ -40dBc/30kHz
	Out of working band	9kHz~1GHz: ≤ -36dBm/30kHz 1GHz~12.75GHz: ≤ -36dBm/30kHz
System Delay		≤ 5.0μSec
I/O Impedance		50Ω
RF Connector		N-Type (Female) / changeable / bottom of casing
Temperature Range		Operation: -25°C ~ +55°C / Storage: -30°C ~ +60°C
Relative Humidity Range		≤ 95% (non condensing)
Power Supply (customizable)		DC -48V / AC 220V, 50/60Hz / AC 110V, 50/60Hz
Backup Power Supply (optional)		4 hours
Casing Level		IP65
Dimensions		428mm X 328mm X 220mm
Weight		≤ 30kg
NMS Monitoring Function (optional)		Real-time alarm for door status, temperature, power supply, LNA, VSWR, self-oscillation, etc. Remote control such as turn on/off, increasing/decreasing output power, etc. Real-time status for output/input power, UL/DL gain, all status of repeater etc.

The Single-Band RF Repeater (RFR) is the kind of repeater used most frequently. It has a simple structure to transparently convey and amplify the wireless signal (at the same frequency) between the BTS (Base Transceiver Station) and mobiles in single wireless network.

The Single-Band RFR is working as a relay between the BTS and mobiles. It picks up the signal from the BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Coverage Antenna (or the Indoor Signal Distribution System) to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.

As per operator's requirement for working frequency, two types of Single-Band RFR are available:
*Band-Selective Single-Band RF Repeater: To amplify all signals in the whole band (bandwidth is customized);
*Channel-Selective Single-Band RF Repeater: To amplify only the signals transmitted in the customized 1 / 2 /4 / 8/ 12 /16 channels.

Q1. Could I get a sample before bulk order?

Yes, we offer the sample for all models but charged.

Q2. What should I do if I don't know about frequency in my country?

Please feel free to contact us with your inquiry, we will find the frequency you need and address your problems. 

Q3. Do you accept OEM/ODM order?

Yes, we can customize the brand logo, colors, and frequencies.

Q4.Shipment Date

Sample	3-5 business days
<20 pcs	7-15 days
20-50 pcs	15-24 days
>50 pcs	Negotiate

Q5: Delivery Date of the sample by DHL/FedEx

USA/Canada/Europe/Asia	3-5 days
Middle East/Latin American	5-7 days
African	3-7 days

Q6.Payment Method

T/T, Western Union, Paypal, and Credit Card are available,
but we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please contact us with more details.

Q7.Others
(1)Frequency
We can customize Single/Double/Triple/Quand/Penta Band for cellphone signal like 2G/3G/4G(GSM/CDMA/DCS/PCS/WCDMA/LTE, etc,)
(2)Output Power &Coverage Areas

Output Power	Coverage Areas
20dBm	500-1500m²
23dBm	1500-2500m²
25dBm	2500-4000m²
27dBm	3000-5000m²
30dBm	5000-8000m²

*Coverage is related to local signal strength, please contact us with your local condition, we can offer the best solution.
(3)Antenna
Cellphone signal booster must attach one indoor antenna and one outdoor antenna by two coaxial cables.
Website's price only includes a signal booster, please contact us if you need one set of devices with antenna, splitter, and coupler.