RF Signal Handheld Detector Monitor Signal Detector Wireless Camera Detector

Product Description

RF Signal Handheld Detector Anti Tracker Monitor Signal Detector Wireless Camera Detector

• Instructions:

1. RF wireless signal detection model.

It is the default signal detection mode. The code meter signal strength indicator is divided into ten levels, There are four types of signals: white, green, yellow, and red, which represent the "white is safety signal", "green is suspicious signal", and "yellow is  danger signal" , "red is lock signal source"within a fixed range.
To adjust the sensitivity of the display screen, in the signal detection mode, adjust the "sensitivity adjustment button" on the right side of the device, turn it clockwise to increase the sensitivity and turn it anti-clockwise to decrease the sensitivity. The sensitivity determines the distance of the detection signal. (Note: In an urban environment, due to the messy signal sources, the device may continue to alarm when the sensitivity is increased, so the best sensitivity is adjusted to the position where the pointer points to 1-3 signal lattice). Regulation standard requirements: the detector will move in a small range, and the detector will not flash and alarm randomly. It can be tested with a wireless router. When it is close to the wireless router, it will alarm, and it will return to normal when it is far away. This is the adjusted state.

1.  Magnetic field detection mode.

Press Button 4 and the red light at the lower left corner will light up, that is, enter the magnetic field detection mode. Use the magnetic field probe at the top of the equipment to detect (Button 2) close to the magnetic source, and the alarm (sound) will on. This mode is suitable for detecting eavesdropping, positioning and snapping equipment with magnet.

1. Camera detection mode.

Press the (Button 8) mode key, and the 8pcs LED laser scanning lights on the back will flash. Press the key again to adjust the flashing speed, which is divided into four gears. You can scan within a fixed range through a special filter in the window. If you find a suspicious red reflective point, you can gradually determine the position of the hidden wireless camera equipment by adjusting the laser flashing frequency from fast to slow (this mode is applicable to observing the reflection point of the lens of the storage pinhole camera)

1. AI intelligent automatic search signal mode

Press the (Button 6) and the sun logo at the bottom of the middle of the display will light up. At this time, the detector will automatically search for a signal once a minute. Once a signal is found, it will give an alarm and light up a pointer prompt. When all ten pointers are on, it will give a continuous alarm sound prompt. This mode is applicable to detecting dormant GPS positioning monitoring equipment.

1. Night vision automatic detection

Press the (Button 7) to turn on the automatic detection of the night vision camera, (Point 12)detect suspicious infrared light sources in the environment through high-precision infrared sensors. In low light or no light environment, as long as the night vision candid shooting equipment is turned on, it will give an alarm immediately, and there is no need to look around with handheld devices. When the detector (Point 12) detects the infrared illumination radiation emitted by the night vision camera equipment, the equipment alarm will give an alarm

• Technical indicators and parameters

RF range	1MHZ-8000MHZ
Detection dynamic range	≥73DB
Detection sensitivity	≤0.03mv
Detection range	2.4G:10 Square (standard 10mv)
	1.2G:15 Square (standard 10mv)
	Mobile band 2G,3G,4G; Signal No.:15 Square
Magnetic field detection	High sensitive magnetic field induction; Detection distance within 10cm
Battery	500mA
Continuous working time	8-10hours
Material	ABS+ Metal
N.W.	350g
Dimension	250*95*47mm

Testing

Q1. Could I get a sample before bulk order?

Yes, we offer the sample for all models but charged.

Q2. What should I do if I don't know about frequency in my country?

Please feel free to contact us with your inquiry, we will find the frequency you need and address your problems. 

Q3. Can I customize frequencies?

Yes, we can customize 2G/3G/4G/5G/LoJack 173MHz, VHF, UHF, Walkie-talkie, interphone, 433MHz,315MHz, 868MHz, 450MHz, iDEN, CDMA, GSM, GPRS, DCS, PCS, AWS, WCDMA, UMTS,3G,4G, LTE 700, LTE 800, LTE 2300, LTE 2600, GPS L1, GPS L2, Galileo, Compass, Glonass, WIFI, Bluetooth, WIMAX, UAV, Drone, 5.8G, etc.

Q4.Shipment Date

Sample	3-5 business days
<20 pcs	7-10 days
20-50 pcs	10-20 days
>50 pcs	Negotiate

Q5: Delivery Date of the sample by DHL/FedEx

USA/Canada/Europe/Asia	3-5 days
Middle East/Latin American	5-7 days
African	3-7 days

Q6.Payment Method
T/T, Western Union, Paypal, and Credit Card are available,
but we suggest paying by ****** Trade Assurance, the most favor, and security method.
*Other methods please contact us with more details.