Cable Access Fiber Optical Mobile Phone, GSM 900MHz Signal Repeater

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Wireless
• Model NO.: GW-36FORG
• Lightning Protection: With Lightning Protection
• Certification: ISO
• Condition: New
• Product Name: GSM900MHz Wireless-Access Fiber Optical Repeater
• Frequencies: GSM900MHz
• Application: Airports, Tourism Regions, Golf Courses
• Output Power: 36W
• Transport Package: Neutral Packing
• Specification: CE, RoHS
• Trademark: Greetwin
• Origin: Shenzhen
• HS Code: 8543709200
• Production Capacity: 2, 000PCS/Month

Product Description

Cable Access Fiber Optical signal repeater for mobile phone , GSM 900MHz

 

Description:

 

Greetwin Fiber Optic Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than setup a new Base Station (BTS). Main operation of RF Repeaters system: For the down link, signals from BTS is fed to Master Unit(MU), the MU then convert RF signal to laser signal then feed to fiber to transmit to Remote Unit(RU). RU then convert laser signal to RF signal, and use Power Amplifier to amplify to high power to IBS or coverage antenna. For the up link, Is a reverse process, signals from user mobile is fed to MU's MS port. Via duplexer, the signal is amplified by low noise amplifier to improve signal strength. Then the signals is fed to RF fiber optical module then converted to laser signals, then the laser signal is transmit to MU, the laser signal from RU is convert to RF signal by RF optical transceiver. Then the RF signals are amplified to more strength signals fed to BTS.

 

The Fiber Optic Repeater (FOR) is designed to solve problems of weak mobile signal in such place: Far away from the BTS (Base Transceiver Station) and has fiber optic cable network underground.
The whole FOR system consists of two parts: Donor Unit and Remote Unit. They transparently convey and amplify the wireless signal between the BTS (Base Transceiver Station) and mobiles via fiber optic cables.

The Donor unit captures the BTS signal via a direct coupler closed to the BTS (or via open air RF transmission through the Donor Antenna), then converts it into optic signal and transmits the amplified signal to the Remote Unit via fiber optic cables. The Remote Unit will reconvert the optic signal into RF signal and provide the signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.

As per the method of receiving BTS signal by the Donor Unit, two types of FOR are available:
Cable-Access FOR: To receive BTS signal via a direct coupler closed to the BTS (recommended);
Wireless-Access FOR: To receive BTS signal via a Donor Antenna (applicable when no fiber optic cable connecting to the BTS); Can be sorted into 2 sub-categories: Band-Selective and Channel-Selective.

 

Features:

 

 

1.  High level, high availability, convenient for maintain;

2.  Internal adopt intelligent monitoring, is convenient to locate the faults for maintain;

3.  Low power consumption, excellent heat dissipation;

4.  High linearity PA, high system gain;

5.  Local and remote monitoring (optional) with automatic fault alarm &remote control;

6.  Compact size, flexible for installation and relocation;

7.  Weatherproof design for all-weather installation;

8.  One MOU can support Max 8 ROUs, Save cost and ease installation.

 

The FOR is mainly applicable to such case:
· Underground fiber optic cable network already exists beneath the area to be covered;
· There is huge obstructive terrain between the BTS and the area to be covered;
· The distance between the BTS and the area to be covered is 20 km around.

 

In comparison with RFR (RF repeater) and FSR (frequency shift repeater), the FOR has the following benefits and disadvantages:

Pro:
No more self-oscillation and easy to choose installation location;
For Cable-Access type, pure BTS signal picked up by the Donor Unit will greatly reduce the signal noise;
The Remote Unit can be installed out of the BTS coverage;
A full 360-degree coverage can be realized;
No need to occupy frequency resource as the link frequency.

Con:
· The total cost of equipment is higher;
· A fiber optical connection between the Donor Unit and Remote Unit is required.

Application:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
· Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, highways
· Indoor: Hotels, exhibition centers, basements, shopping malls, offices, parking lots.

 

Data Sheet:

 

Master Unit(MU) Technical Specification:

 

Items		Testing Condition	Technical Specification			Memo
			Downlink		Uplink
Frequency Range		Working in-band	890-915MHz		935-960MHz
Bandwidth		Working in-band	25MHz
Output Power		Working in-band	-		0dBm
Max RF Input level		Working in-band	-30dBm		-
Min RF Input level		Working in-band	-110dBm		-
Max RF input without damage		Working in-band	10dBm		-
Noise Figure		Working in-band	≤5dB		-
VSWR		Working in-band	≤1.5
Time Delay		Working in-band	≤12.0μs
Spurious Emission	9kHz-1GHz	BW:30KHz	≤-36	≤-36
	1GHz-12.75GHz	BW:30KHz	≤-30	≤-30
Connector			N-Female
Optical Specifications
Optical Output Power			-8dBm±2dB		-
Optical Max Input power					+4dBm
Optical Min Input power					+0dBm
Optical Input damage level					+10dBm
Optical length			DL: 1310nm, UL: 1550nm
Optical Loss			≤10dB /Includes the loss of the optical splitter
Optical Connector			FC/APC(WDM, one core)
Nos Of Optical Ports			1-4
Power Supply and Mechanical Specifications
Power Supply			AC220V±60V,45~55Hz
Dimension			530mm*310mm*190mm
Weight			19kg
Max. Power Consumption			150W
Operating Temperature			-5~+45ºC
Operating Humidity			≤85%
Environmental Class			IP65
RF Connector			N-Female, 50ohm
MTBF			≥50000 hours
Monitor Interface			Local Monitor: Remote Monitor: RS232 ,GSM/UMTS MODEM			Option
Alarm Type			No Power, Over Temperature, RU Failed

 

 

Remote Unit Technical Specification:

 

Items		Testing Condition	Technical Specification
			Downlink		Uplink
Frequency Range		Working in-band	890-915MHz		935-960MHz
Bandwidth		Working in-band	25MHz
Output Power (Max.)		Working in-band	36±2dBm		-
Max Input without damage		Working in-band	--		+10dBm
Max Input RF level		Working in-band	--		-30dBm
Min Input RF level		Working in-band	--		-110dBm
Noise Figure		Working in-band	--		≤5dB
Gain Adjustable Range/Step		Working in-band	≥25dB/1dB
Gain Adjustable Error		Working in-band	Gain adjustable range is 0~20dB, error≤1dB; ≥21dB, error≤1.5dB
Ripple		Working in-band	≤3dB in bandwidth
ALC		Working in-band	When adding ≤10dB at max. Output level, output variation ≤±2dB, When adding >10dB, output variation ≤±2dB or be off.
VSWR		Working in-band	≤1.5
Time Delay		Working in-band	≤12.0μs
Spurious Emission	9kHz-1GHz	BW:30KHz	≤-36	≤-36
	1GHz-12.75GHz	BW:30KHz	≤-30	≤-30
Optical Specifications
Optical Output Power			0~3dBm
Optical length			DL: 1310nm, UL: 1550nm
Optical Loss			≤10dB /Includes the loss of the optical splitter
Optical Connector			FC/APC(WDM, one core)
Optical Max input power			+4dBm
Optical Min input power			+0dBm
Optical input power without damage			+10dBm
Power Supply and Mechanical Specifications
Power Supply			AC220V±60V,45~55Hz
Dimension			530mm*310mm*190mm
Weight			19kg
Max. Power Consumption			200W
Operating Temperature			-25~+55ºC
Operating Humidity			≤95%
Environmental Class			IP65
RF Connector			N-Female, 50ohm
MTBF			≥50000 hours
Monitor Interface			Local Monitor: Remote Monitor: RS232 ,GSM/UMTS MODEM
Alarm Type			No Power, PA Failure, VSWR, Over Power, Over Temperature

 

 

MOU+ROU Whole System Technical Specification:

 

Items	Testing Condition	Technical Specification		Memo
		uplink	downlink
Frequency Range	Working in-band	890-915MHz	935-960MHz
Bandwidth	Working in-band	25MHz
Output Power (Max.)	Working in-band	0dBm	+36±2dBm
ALC(dB)	Input add 10dB	△Po≤±2
Max Gain	Working in-band	90±3dB	90±3dB	@10dB optic path loss
Gain Adjustable Range(dB)	Working in-band	≥30
Gain Adjustable Linear(dB)	10dB	±1.0
	20dB	±1.0
	30dB	±1.5
Ripple in Band(dB)	Effective Bandwidth	≤3
Max.input level	Continue 1min	-10 dBm
Delay(us)	Working in-band	≤12
Noise Figure(dB)	Working in-band	≤5(Max.gain)
Spurious Emission	9kHz~1GHz	≤-36dBm/100kHz
	1GHz~12.75GHz	≤-30dBm/1MHz
Port VSWR	BS Port	≤1.5
	MS Port	≤1.5

 

 

Installation

Installation Location Choice Principle:

1. Installed in the irrelevant personnel not easy contact place; And easy to the power supply and decorate place;

2. Have cable feeder,it's convenient opening fiber connection;

3. The installation location should avoid heat source and damp;

4. The installation location should be well ventilated.Need to vertical hang it on a wall or a mast, in order to ensure that the heat dissipation.When hanging, need to consider from the top≥ 50 cm and distance from the bottom ≥100 cm ;

 

Optical Fiber Connection

Optical fiber connectors should adopt type of FC/PC, in general it with black protection cover and corresponding to light adapter.Please with instruments cleaning detergents to spray when connecting. In order to avoid besmirch influence light way transmission, increase the light path insertion loss.Please follow the image when joining: plug the bolt aim at key slot (as per image),tighten up after plug: can not too tight or too loose. Otherwise, it will affect the loss of the optical connector.

 

P.S:The optical cable don't crimp, need cover by good protection.

Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)

Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A.  Drill holes in the selected place and install expansion bolts.
B.  Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.

Connection:
A.  BTS Port: donor antenna cable is connected with Outdoor Port;
B.  MS Port: service whip antenna is connected with Indoor Port;
C.  DC IN connected with Power adaptor.

FAQ

Q1.Payment Method

T/T, Western Union, Paypal, and Credit Card are available,
and we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please us with more details.

Q2.Delivery Date&Lead Time

Quantity	Lead time	Delivery to American/Middle East/Asia/Europe
<20 pcs	3-5 business days	3-7 business days by DHL 5-7 business days by FedEx/UPS
20-100 pcs	7-15 business days
>100 pcs	15-24 business days

* it to get the sample.

Q3. Can I customize frequencies?

Yes, we can customize 2G/3G/4G/5G/GSM/CDMA/DCS/AWS/PCS/WCDMA/LTE,etc.

Q4. What should I do if I don't know about frequency in my country?

Please feel free to us with your inquiry, we will find the frequency you need and address your problems. 

Other Signal Repeater

More signal repeater please it!

 

Company Profile